|
|
|
95 prizm rpms drop when brakes applied
|
|
|
| |
|
|
adiobampro369
User
Sep 15, 2009, 6:42 PM
Post #1 of 10
(3289 views)
|
|
95 prizm rpms drop when brakes applied
|
Sign In
|
|
I know yall have helping me a lot in the past and that why Im coming back for your help again. PS Thanks again for the help! When ever I start to hit my brakes my RPMs drop low at about 700 RPMs and acts like its gonna stall but it never does. But then it jumps back up to idle. Also on my gas pedal when i hit it i hear rattling noise like something is lose but then if i push the pedal a little further it stops. It just sounds like something is lose.
(This post was edited by adiobampro369 on Sep 17, 2009, 4:50 PM)
|
|
| |
|
|
kevinthehawk
New User
Nov 17, 2009, 7:20 PM
Post #2 of 10
(3240 views)
|
|
Re: 95 prizm rpms drop when brakes applied
|
Sign In
|
|
Any luck with the problem? I have a 94 Geo Prizm LSI 1.8 L, and I'm having the same problem with the brakes and the idle. I'm guessing it's a vacuum leak. I just ordered a vacuum tester, and I'll keep you updated.
|
|
| |
|
|
Loren Champlain Sr
Veteran
/ Moderator
Nov 17, 2009, 7:37 PM
Post #3 of 10
(3238 views)
|
|
Re: 95 prizm rpms drop when brakes applied
|
Sign In
|
|
kevin; The power brake booster requires a massive amount of engine vacuum to operate. Listen, under the dash, while depressing the brake pedal (with the engine running) for a hissing sound. Also, check for any vacuum leaks under the hood.
Loren
SW Washington
|
|
| |
|
|
kevinthehawk
New User
Nov 17, 2009, 7:41 PM
Post #4 of 10
(3237 views)
|
|
Re: 95 prizm rpms drop when brakes applied
|
Sign In
|
|
Thanks, Loren. I'll try that.
|
|
| |
|
|
adiobampro369
User
Nov 19, 2009, 5:23 AM
Post #5 of 10
(3227 views)
|
|
Re: 95 prizm rpms drop when brakes applied
|
Sign In
|
|
I'll try that.thanks! The only bad thing is i have one bad engine mount so my car rattles a little so its hard to hear things lol. if there is a vacuum leak what do i buy to fix it? or is there like tons of things to get?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 19, 2009, 5:55 AM
Post #6 of 10
(3223 views)
|
|
Re: 95 prizm rpms drop when brakes applied
|
Sign In
|
|
kevinthehawk
We can't address more than one vehicle within the same thread. It gets way too confusing with 2 people talking about 2 different cars. It will work a lot better is you start a fresh question of your own.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Loren Champlain Sr
Veteran
/ Moderator
Nov 19, 2009, 7:29 PM
Post #7 of 10
(3218 views)
|
|
Re: 95 prizm rpms drop when brakes applied
|
Sign In
|
|
kevin/audio; Are you the same person with the same problem? If so, you need to check for vacuum leaks as previously said. If a different person with a different problem, try some vacuum stop leak. It's kind of like radiator stop leak. Usually, right near the blinker fluid at the parts store.
Loren
SW Washington
|
|
| |
|
|
adiobampro369
User
Nov 19, 2009, 8:56 PM
Post #8 of 10
(3212 views)
|
Re: 95 prizm rpms drop when brakes applied
|
Sign In
|
|
Im the one that started the thread and then the other guy had seen that he had the same problem and was asking advice on it too. sorry for the confusion. I hope the problem that we both have works out.lol. But it seems we are both in the same boat. I will try to find the stop leak stuff and see if that does the problem and hopefully the same goes for the other guy! Thanks!
|
|
| |
|
|
Loren Champlain Sr
Veteran
/ Moderator
Nov 20, 2009, 1:15 PM
Post #9 of 10
(3204 views)
|
|
Re: 95 prizm rpms drop when brakes applied
|
Sign In
|
|
audio; My reply was 'tongue in cheek'. Just kidding you about the vacuum stop leak. A trick to finding a vacuum leak, you can hold a piece of hose to your ear while moving it around to different areas of the engine. The hose will amplify all noises, including a vacuum leak. You may be able to pin point where it is, that way. If you just can't find it, Snap On makes a 'smoke' machine, which most shops will have. Can be a bit expensive of a test, usually about an hours' labor, but if there is a leak, that will find it.
Loren
SW Washington
|
|
| |
|
|
adiobampro369
User
Nov 20, 2009, 4:05 PM
Post #10 of 10
(3199 views)
|
|
Re: 95 prizm rpms drop when brakes applied
|
Sign In
|
|
Ok ill try that...Theres a guy that comes to our glass shop and he drives a Snap on van which is like the size of an RV.When you look inside this thing you feel like your in heaven looking at all those tools! Its awesome! lol but ill ask him if he has anything that will help me out. I think a friend of mine had one of those tools you use for putting down in the engine and its the tube to listen for.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
