|
|
|
98 ford explorer wont start
|
|
|
| |
|
|
gkraft17
New User
Nov 14, 2013, 2:06 PM
Post #1 of 11
(2742 views)
|
|
98 ford explorer wont start
|
Sign In
|
|
I have a 98 ford explorer. a few weeks ago while driving it quit running. I towed it home and it sat for a day, I went to start it and it ran fine for another week and it died again. let it cool down for several hours and sure enough it started and ran fine. last night same thing again but now it wouldn't start anymore. I changed coil pack and crankcase positon sensor I don't seem to be getting spark..i also notice that theft light is flashing please help
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 14, 2013, 2:10 PM
Post #2 of 11
(2736 views)
|
|
Re: 98 ford explorer wont start
|
Sign In
|
|
If the theft light is flashing it isn't going to start. You are in security lockout. If you have another key try that. If that doesn't work, it's going to have to go to the dealer for programming.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
gkraft17
New User
Nov 14, 2013, 2:12 PM
Post #3 of 11
(2734 views)
|
|
Re: 98 ford explorer wont start
|
Sign In
|
|
I only have the one key. is there any way I can bypass it?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 14, 2013, 2:41 PM
Post #4 of 11
(2723 views)
|
|
Re: 98 ford explorer wont start
|
Sign In
|
|
Definitely not.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 14, 2013, 5:17 PM
Post #5 of 11
(2708 views)
|
|
Re: 98 ford explorer wont start
|
Sign In
|
|
I don't think that PATS should be killing the engine when it is already running while your cruising down the road. That would be dangerous. Dealer or someone with a high end scan tool should see what codes are stored in the PAT module and the PCM.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Nov 14, 2013, 5:17 PM)
|
|
| |
|
|
gkraft17
New User
Nov 14, 2013, 7:05 PM
Post #6 of 11
(2700 views)
|
|
Re: 98 ford explorer wont start
|
Sign In
|
|
well its not the anti theft system or pats. does anyone have any other ideas? im getting spark and fuel and its turning over good
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 14, 2013, 7:24 PM
Post #7 of 11
(2696 views)
|
|
Re: 98 ford explorer wont start
|
Sign In
|
|
Oh really? If that light is flashing, it is in lockout. It may have other issues too but it's never going to run with that light flashing. If you have other ideas, go for it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
gkraft17
New User
Nov 14, 2013, 7:35 PM
Post #8 of 11
(2693 views)
|
|
Re: 98 ford explorer wont start
|
Sign In
|
|
its not flashing. it goes off after a few seconds I got it to stop flashing but locking doors and entering my code.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 14, 2013, 7:37 PM
Post #9 of 11
(2691 views)
|
|
Re: 98 ford explorer wont start
|
Sign In
|
|
Well, that puts you back to basics for testing..............
All "crank, no start" conditions are approached in the same way. Every engine requires certain functions to be able to run. Some of these functions rely on specific components to work and some components are part of more than one function so it is important to see the whole picture to be able to conclude anything about what may have failed. Also, these functions can ONLY be tested during the failure. Any other time and they will simply test good because the problem isn't present at the moment.
If you approach this in any other way, you are merely guessing and that only serves to replace unnecessary parts and wastes money.
Every engine requires spark, fuel and compression to run. That's what we have to look for.
These are the basics that need to be tested and will give us the info required to isolate a cause.
1) Test for spark at the plug end of the wire using a spark tester. If none found, check for power supply on the + terminal of the coil with the key on.
2) Test for injector pulse using a small bulb called a noid light. If none found, check for power supply at one side of the injector with the key on.
3) Use a fuel pressure gauge to test for correct fuel pressure, also noticing if the pressure holds when key is shut off.
4) If all of these things check good, then you would need to do a complete compression test.
Once you have determined which of these functions has dropped out,
you will know which system is having the problem.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jason8626
New User
Nov 19, 2013, 9:05 PM
Post #10 of 11
(2651 views)
|
|
Re: 98 ford explorer wont start
|
Sign In
|
|
Hi, since the car was died when you driving and restart after being towing home, I assume there is no crank problem.
there thing to make engine running. follow these test to figure out what is the problem.
1. no spark. use spark tester to check if the sparks on fire. if not, check spark condition, coil, cap.
2. no fuel. use fuel pressure gauge to check fuel trail pressure. run the key to on position, but don't start it.
3. wrong ignition timing. it is mechanical engine problem. cam sensor works?
compression also will cause no start but most often it will only cause less power.
assumption: bad fuel pump, relay, or fuse.
good luck.
(This post was edited by jason8626 on Nov 19, 2013, 9:36 PM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 20, 2013, 3:56 AM
Post #11 of 11
(2630 views)
|
|
Re: 98 ford explorer wont start
|
Sign In
|
|
OP, please ignore the previous post as it is not accurate at all.
jason8626 Please refrain from posting on subjects you are not experienced in.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
