|
|
Guest
Anonymous Poster
j.tennant11@yahoo.com
Jul 21, 2009, 12:42 PM
Post #1 of 2
(2612 views)
|
99 Ford taurus
|
Sign In
|
|
i have a 1999 ford taurus station wagon dual overhead cam, and every time i drive the car it wants to stall and it shuts off, then when i turn the car on it idles high and the rpm stay above the normal idleling, i did a diagnostic on it and it gave me p0104 but i am not under standing what that means is it the idle air control valve, or ? and the other two codes i got was p0171 and p0174 could you help me thanks. I have moved your post and started a new question for you HammerTime
(This post was edited by Hammer Time on Jul 21, 2009, 1:06 PM)
|
|
| |
|
Loren Champlain Sr
Veteran
/ Moderator
Jul 21, 2009, 1:34 PM
Post #2 of 2
(2600 views)
|
Re: 99 Ford taurus
|
Sign In
|
|
P0104 doesn't show up in my data base, but P0171 and P0174 are both lean codes. It is very common for a contaminated Mass Air Flow sensor to cause this. Look for a vacuum leak at the connection on the plenum, remove and clean the MAF sensor. An injection cleaning would probably help. Loren SW Washington
|
|
| |
|