|
|
|
99 GMC Sonoma zr2 lower intake problems
|
|
|
| |
|
|
tbach12
Novice
Feb 4, 2014, 3:33 PM
Post #1 of 6
(1228 views)
|
|
99 GMC Sonoma zr2 lower intake problems
|
Sign In
|
|
This truck has the 4x4 and V6 vortec motor. Recently the lower intake gasket was blown. I replaced the gasket with a new one. Now it has a tick/knock in the motor and the oil is dark black after just running it for 25 miles. The oil pressure gauge is reading way above the max, but i figured that was just because i didnt hook up all the electrical correctly. You can smell it burning oil. The engine temp stays where it is supposed to be and the coolant no longer leaks. I am guessing that the tick/knock is a cyclinder that is mis-firing? Thanks for your time
(This post was edited by tbach12 on Feb 4, 2014, 3:41 PM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Feb 4, 2014, 3:51 PM
Post #2 of 6
(1221 views)
|
|
Re: 99 GMC Sonoma zr2 lower intake problems
|
Sign In
|
|
How did you reset the distributor?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
tbach12
Novice
Feb 4, 2014, 4:32 PM
Post #3 of 6
(1212 views)
|
|
Re: 99 GMC Sonoma zr2 lower intake problems
|
Sign In
|
|
I marked a point on the firewall and pointed the line back at the mark when i put it back in.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Feb 4, 2014, 5:04 PM
Post #4 of 6
(1208 views)
|
|
Re: 99 GMC Sonoma zr2 lower intake problems
|
Sign In
|
|
That accounts for the rotor but what about the position of the rotation of the housing?
Is the check engine light coming on when running? If so, scan for codes and post the numbers here.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
tbach12
Novice
Feb 4, 2014, 5:43 PM
Post #5 of 6
(1203 views)
|
|
Re: 99 GMC Sonoma zr2 lower intake problems
|
Sign In
|
|
How would I set the position of the totation of the housing?
And the check engine light flashes. I was told that is a Type A misfire? I will try to get a scanner, but i do not have one at the moment.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Feb 4, 2014, 5:51 PM
Post #6 of 6
(1201 views)
|
|
Re: 99 GMC Sonoma zr2 lower intake problems
|
Sign In
|
|
I'm afraid you're going to have to get your hands on a high end professional scanner. That's the only way to get that distributor in synch with the crank sensor. It's called setting the Cam offset. Turning that distributor does not change the timing. It only throws the primary out of synch with the secondary and the injector timing.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
