Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









COIL IS HOT NO SPARK @ PLUGS


Search for (search options)
 



1dodge1mopar
User

Apr 13, 2012, 7:27 PM

Post #1 of 3 (2116 views)
  post locked   COIL IS HOT NO SPARK @ PLUGS  

I HAVE A '92 DAKOTA 3.9 V-6.

THE COIL FIRES REALLY GOOD-DIDN'T HOLD RUBBER BOOT!! #1 PLUG WON'T FIRE.

THESE ARE THE VALUES FOR THE CAM SENSOR:
ALL CHECKS ARE BACK-PROBED
SENSOR CONNECTED
1) TAN-YELLOWISH WIRE=.07V WITH KEY ON (WKO); .11V CRANKING (C)
2) GRAY/BK ST WIRE=.03V WKO; .07 C

SENSOR DISCONNECTED
1) GRAY/BK ST=.O3V WKO; .11/.12-(HIGH) .26/.30V C
2) TAN/YELLOWISH=4.98V WKO; 5.02-5.10 C

SHOULD WE CONCLUDE THE SENSOR IS BAD WITH NO 5.0V VALUE WHEN CONNECTED?

THE CRANK SENSOR GAVE ME SIMILAR VALUES. DOES THE CR-S DEPEND ON THE CA-S OR THE OTHER WAY AROUND?

THANX FOR ANY ADVICE


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Apr 13, 2012, 7:36 PM

Post #2 of 3 (2097 views)
  post locked   Re: COIL IS HOT NO SPARK @ PLUGS  

OK, you need to stop opening new threads. If someone wants to get involved, you already have other threads.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Apr 13, 2012, 7:37 PM

Post #3 of 3 (2091 views)
  post locked   Re: COIL IS HOT NO SPARK @ PLUGS  

If your coil is firing while cranking the engine, you don't need to check for crank or cam signals because they are there. You need to figure out why that spark isn't reaching the plug once it goes inside the distributor.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.






 
 
 






Search for (options) Privacy Sitemap