|
|
CRDi Hyundai Accent crank but wont start
|
|
|
| |
|
AMIT TRANSPORT
New User
May 2, 2013, 12:29 AM
Post #1 of 2
(5949 views)
|
CRDi Hyundai Accent crank but wont start
|
Sign In
|
|
Hyundai Accent 1.5 CRDi SEDAN 2010 Model with 207,858 km run. Got 11 units of accent I'm using it in my business running 300km a day. 1 unit are now in the garage our mechanic change only the clutch disc, pressure plates and release bearing..after putting it back the engine just crank but wont start..on the computer it keeps pointing the injector #2 but even if we changed it still the same.I hired an electrician he said that all the wiring are fine..we change the fuel pump and computer box still it cranks but wont start..yesterday we checked the timing chains and it is in the right place..Can you help me? I don't know what to do now we're just staring on my car cause for me we did what we got to do..
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 2, 2013, 3:39 AM
Post #2 of 2
(5911 views)
|
Re: CRDi Hyundai Accent crank but wont start
|
Sign In
|
|
I would check the Crank sensor for damage. That's quite common when removing the transmission since it's usually located on the edge of the bellhousing. If they changed the flywheel, make sure they have the correct one because the Crank sensor reads from it. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|