Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   Lukewarm Heat............
New antifreeze reverse flush heater core...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   2014 Nissan Sentra Shaking
Car recently started shaking when accele...

no_replies.gif image   Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
N/A

hot_with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...




Crank Sensor

Search for (search options)
 



Cassie
New User

Mar 29, 2007, 1:17 PM

Post #1 of 6 (2147 views)
Crank Sensor Sign In
Can you please tell me where the exact location of the Crank Sensor is on a 1993 Pontiac Grand Prix? We need to replace it, but we are having trouble locating it.Please contact me A.S.A.P.Thanks Alot CassieTongue


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Mar 29, 2007, 3:18 PM

Post #2 of 6 (2144 views)
Re: Crank Sensor Sign In
I think it's in the back of the engine and hard to see or get at. Post back what engine you have as I think you had a choice of a couple on that car, T



Cassie
New User

Mar 29, 2007, 4:00 PM

Post #3 of 6 (2142 views)
Re: Crank Sensor Sign In
Ok i got it its a 3.1liter & a 1993 Pontiac Grand Prix!!!Smile


steve01832
Veteran
steve01832 profile image

Apr 2, 2007, 4:09 AM

Post #4 of 6 (2113 views)
Re: Crank Sensor Sign In
It should be lower engine, passenger side. It has a 2 wire connector on it. The sensor has a black plug angled at 90* and has a metal hold down with a single bolt going thru it. When you go to take the sensor out, first soak it with penetrating oil and twist it as you pull. It has an o-ring around it and they sometimes can be a bear to remove. Make sure the o-ring is on the new sensor before you install it or you will have a good size oil leak.

Steve


DanD
Veteran / Moderator
DanD profile image

Apr 2, 2007, 5:30 AM

Post #5 of 6 (2112 views)
Re: Crank Sensor Sign In
Quote
sometimes can be a bear to remove.
You couldn’t be more right about these little guys being a bear; one engine they’ll pop out as if they were only install yesterday; ten minutes and you’re done. Then the next one will be in there as if it was welded. The worse one I’ve ever had to do; I ended up removing the oil pan and driving the sensor out from the inside. Removing an oil pan on this vehicle with this engine is anything but a ten-minute job; flat rate pays better then four hours for an experienced technician.
The plastic 90-degree portion of the sensor that Steve is talking about becomes so brittle that no matter how gentle you are; it’ll break off flush with the engine block. Then you’re into attempting to install a sheet metal screw into the center of the sensor, in the hope of having something to grab onto. I’ve had people tell me that they have tried drilling the center of the sensor using a flexible drill extension without success. You can actually get up there with the extension but the magnet that is imbedded in the sensor is so hard that the drill bit won’t cut into it.
OH the things that should be easy that turn into a nightmare; no wonder my hair is thinning and turned so gray. LOL
Here's what you're looking for.
Dan.



Canadian "EH"






(This post was edited by DanD on Apr 2, 2007, 5:41 AM)


steve01832
Veteran
steve01832 profile image

Apr 3, 2007, 3:56 AM

Post #6 of 6 (2104 views)
Re: Crank Sensor Sign In
You still have color in your hair? Man, I've definitely been in this trade too long. LOL





 
 
 






Search for (options) Privacy Sitemap