Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Engine trouble


Search for (search options)
 



ranger87
New User

Feb 14, 2011, 3:31 PM

Post #1 of 4 (1524 views)
Engine trouble Sign In

Hi i was driving my 87 ranger down the road and stoped at a stop sign and it shut down on me. I tryd starting it and it started i tryed to drive it home i pulled out and tryed to give it gas and it just bogged down and shut off and hasnt started since.I replaced the coil,distributer,and wires and it didnt work.Does any1 know what my poroblem is?? If some1 can help me it would be really appreciated!!


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Feb 14, 2011, 3:42 PM

Post #2 of 4 (1520 views)
Re: Engine trouble Sign In

You really should stop tossing parts unless you wanted all that stuff anyway.

First check is find out what's missing. Most are missing either spark or fuel delivery so if you find out which now that it's not running that at least narrows it down as to where to go next,

T



ranger87
New User

Feb 15, 2011, 9:05 AM

Post #3 of 4 (1509 views)
Re: Engine trouble Sign In

I wanted to change it all anyway. I dont believe its getting spark i sprayed starting fluid in the intake to see if i was getting spark(b4 i changed all those) and it didnt start. Thats what leads me to believe its not getting spark.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Feb 15, 2011, 9:31 AM

Post #4 of 4 (1506 views)
Re: Engine trouble Sign In

You can't assume things like that.

1) Test for spark at the plug end of the wire using a spark tester. If none found, check for power supply on the + terminal of the coil with the key on.


2) Test for injector pulse using a small bulb called a noid light. If none found, check for power supply at one side of the injector with the key on.


3) Use a fuel pressure gauge to test for correct fuel pressure, also noticing if the pressure holds when key is shut off.

4) If all of these things check good, then you would need to do a complete compression test.

Once you have determined which of these functions has dropped out,
you will know which system is having the problem.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







 
 
 






Search for (options) Privacy Sitemap