|
|
milling machine
User
Mar 25, 2010, 2:13 PM
Post #1 of 9
(1831 views)
|
|
Ford Fuel Coupling
|
Sign In
|
|
I have a 97 ford explorer, 6cyl, 4.OL sohc, I have a very slight fuel leak at the fuel line return hose spring lock coupling. I am trying to change the seals, but cannot get the coupling apart even with the correct tool. Does anyone have a tip as of how to get it apart ?
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 25, 2010, 3:09 PM
Post #2 of 9
(1829 views)
|
|
Re: Ford Fuel Coupling
|
Sign In
|
|
Pain in the butt huh? Try cleaning up the things as best you can and some WD-40 might help get them apart. They sure snap together fast for the assembly line!
T
|
|
| |
|
|
milling machine
User
Mar 25, 2010, 3:23 PM
Post #3 of 9
(1824 views)
|
|
Re: Ford Fuel Coupling
|
Sign In
|
|
I will try to spray some WD-40, and see if that helps.
|
|
| |
|
|
way2old
Veteran
/ Moderator
Mar 25, 2010, 3:58 PM
Post #4 of 9
(1822 views)
|
|
Re: Ford Fuel Coupling
|
Sign In
|
|
When you insert the release tool, press the lines together as far as you can. Then the tool will slide in just a little farther and release the spring.
Being way2old is why I need help from younger minds
|
|
| |
|
|
milling machine
User
Mar 25, 2010, 4:05 PM
Post #5 of 9
(1820 views)
|
|
Re: Ford Fuel Coupling
|
Sign In
|
|
Ok, I'll try that too and see what happens.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Mar 25, 2010, 4:27 PM
Post #6 of 9
(1819 views)
|
|
Re: Ford Fuel Coupling
|
Sign In
|
|
In addition to the other tips, twist the connections after you spray it down so the O rings get loose & the lube gets in there..............
|
|
| |
|
|
milling machine
User
Mar 25, 2010, 5:19 PM
Post #7 of 9
(1817 views)
|
|
Re: Ford Fuel Coupling
|
Sign In
|
|
I'll try to twist it just as you say because so far nothing is working. If all else fails I will just have to take the fuel line completely out.
|
|
| |
|
|
milling machine
User
Mar 25, 2010, 5:44 PM
Post #8 of 9
(1814 views)
|
|
Re: Ford Fuel Coupling
|
Sign In
|
|
I lubed it and twisted it at the same time as you said and I could feel it getting looser and looser and it finally came off. Thanks for the help
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Mar 25, 2010, 5:49 PM
Post #9 of 9
(1812 views)
|
|
Re: Ford Fuel Coupling
|
Sign In
|
|
Glad to see you got it.........
I just had another thought about going one size up on the tool and forcing it in sometimes helps and was gonna post it but you were a little to quick  .........Good job......
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
