|
|
huck1021
New User
Dec 26, 2010, 1:15 AM
Post #1 of 4
(1482 views)
|
|
Mitsubishi eclipse
|
Sign In
|
|
My mitsubishi eclipse Gs 1995 2.0 liter dohc. the milage is 151,000. Is getting fuel fowled spark plugs and will not start. Does any one know what this could possibly be?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 26, 2010, 6:07 AM
Post #2 of 4
(1473 views)
|
|
Re: Mitsubishi eclipse
|
Sign In
|
|
Do a complete compression test and post the readings here.
Is the check engine light coming on at all? If so, get the codes read and post them also.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
huck1021
New User
Dec 26, 2010, 9:38 AM
Post #3 of 4
(1468 views)
|
|
Re: Mitsubishi eclipse
|
Sign In
|
|
The check engine light is on. We just repleaced the crank sensor could that have anything to do with it. And we can not connect it to a computer beacuse we are stuck at home
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 26, 2010, 10:15 AM
Post #4 of 4
(1465 views)
|
|
Re: Mitsubishi eclipse
|
Sign In
|
|
All "crank, no start" conditions are approached in the same way. Every engine
requires certain functions to be able to run. Some of these functions rely on
specific components to work and some components are part of more than one
function so it is important to see the whole picture to be able to conclude anything
about what may have failed. Also, these functions can ONLY be tested during the
failure. Any other time and they will simply test good because the problem isn't
present at the moment.
If you approach this in any other way, you are merely guessing and that only serves
to replace unnecessary parts and wastes money.
Every engine requires spark, fuel and compression to run. That's what we have to
look for.
These are the basics that need to be tested and will give us the info required to
isolate a cause.
1) Test for spark at the plug end of the wire using a spark tester. If none found,
check for power supply on the + terminal of the coil with the key on.
2) Test for injector pulse using a small bulb called a noid light. If none found,
check for power supply at one side of the injector with the key on.
3) Use a fuel pressure gauge to test for correct fuel pressure, also noticing if the
pressure holds when key is shut off.
4) If all of these things check good, then you would need to do a complete
compression test.
Once you have determined which of these functions has dropped out,
you will know which system is having the problem.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
| | |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
