Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




NO START, NO SPARK

Search for (search options)
 



Jamesleandre
User

Jul 20, 2013, 1:40 AM

Post #1 of 5 (1476 views)
NO START, NO SPARK Sign In
92 Subaru Loyale
4 cyL 1.8 Liter engine
144,764 mi

Problem: No START, NO SPARK

How is everyone doing today?
I'm working on a 92 Subaru Loyale 1.8 Liter
no spark, no start. There is power coming from the ignition switch to coil.
The primary coil Resistance is 1.1 Ohms, and the secondary coil resistance is 10.19 kilo ohms, so the
coil is good. There is a condenser below the coil. I removed it and put another condenser from the same type of car
still no start, no spark. I exchanged the crank angle sensor distributor and still no start, no spark. The fuel pressure gauge says 20 psi, so the
fuel pump is good.The timing belt is not missing any teeth, or damaged.The only thing left to do is to go to a Junk yard and pick up an ECU and try
that. Any advice would be appreciated before spending money on ECU.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jul 20, 2013, 3:02 AM

Post #2 of 5 (1453 views)
Re: NO START, NO SPARK Sign In
Quote
The fuel pressure gauge says 20 psi, so the
fuel pump is good
You're writing off a lot of things that you shouldn't be


fuel pressure spec
Maximum 36 - 50 psi (245 - 343 kPa)
Controlled at idle 20 - 24 psi (137 - 167 kPa)

Just because a timing belt isn't missing any teeth doesn't mean the car is in time.

Just because the resistance is good, doesn't mean a coil is good

You need to find out if you have injector pulse and if not, power supply to the injector.

You also need to scan the computer for any stored trouble codes.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Jul 20, 2013, 1:51 PM)


Jamesleandre
User

Jul 20, 2013, 12:58 PM

Post #3 of 5 (1438 views)
Re: NO START, NO SPARK Sign In
I"m sorry, I forgot to mention that I have exchamged the coil with a coil from another car still no start, no spark. After putting the engine on TDC The timing belt looks like it might be off when I compare it from what ALLDATA has. I"ll put it where ALLdata says it should be .


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jul 20, 2013, 1:46 PM

Post #4 of 5 (1435 views)
Re: NO START, NO SPARK Sign In
Quote
I"ll put it where ALLdata says it should be .
Yeah, that would be a good idea.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Jul 20, 2013, 2:09 PM

Post #5 of 5 (1429 views)
Re: NO START, NO SPARK Sign In
Quote
The only thing left to do is to go to a Junk yard and pick up an ECU
You haven't tested anything except coil resistance, which is inconclusive. What did you use to test power to the coil?





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Jul 20, 2013, 2:11 PM)





 
 
 






Search for (options) Privacy Sitemap