Very Poor Performance - Engine Troubleshooting


	Auto Repair Home	SEARCH POSTS	WHO'S ONLINE	LOG IN

Automotive Repair

Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:
  Login
  Sign up here!

Latest Forum Post

1989 toyota pickup 3.0 crank no start

I have a 1989 toyota pickup 3.0 crank no...

Strut spring orientation and strut mount tension nut

2017 Nissan rogue awd 2.5 L Put in Monro...

Transmission stuck in part, I have tried everything

So I'm working on my elderly fathers 201...

2017 dodge journey LED headlights on/off randomly

Year of vehicle 2017 Make of vehicle dod...

Kia Soul starter replacement issues!

Okay so my car is a 2010 Kia soul 2.0 en...

Please Help - Knock sound & engine fail

Hi all, Hoping to get some insight and ...

multiple warning lights

2013 GMC Terrain 130,000 miles 4 cylinde...

03 alero no low speed blower

Good day everyone, I have a 2003 Olds a...

04 Chevy 2500hd tail light issues

Help!!! I have changed my combo switch...

1999 Grand Caravan Sport not starting.

Hi. I'm new here. I hope someone can hel...

Very Poor Performance

Sign up here!

Search for (search options)

Auto Repair Home>> Automotive Repair>> Engine Troubleshooting

astrovan
New User

May 21, 2015, 10:16 PM

Post #1 of 3 (1146 views)

Very Poor Performance	Sign In

1990 Astro Van with replaced engine (from 1990 C1500 pickup). Unknown true mileage since engine was replaced, and I don't know when.

Van was running rough, and would stall. This occurred all at once, with no warning. I first thought I was out of gas, but that wasn't the problem.

After it finally wouldn't stay started at all, I had it towed to shop, and mechanic replaced the throttle body (figured there was a crack somewhere in it, since the vacuum was gushing out, and nothing else he did - replaced a gasket - solved the problem.

It is now running, but still very poorly. Acceleration gives it no power, and idle makes it want to die - but it hasn't died on me yet.

Can you give me some ideas? I'm thinking about the MAF sensor, and I wonder where this is located. Would it be under the engine cover inside the cab, or under the hood, and what would it look like?

Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

May 22, 2015, 2:37 AM

Post #2 of 3 (1133 views)

Re: Very Poor Performance	Sign In

"Vacuum gushing out?"

Whatever that means? Guess I'd begin with a compression test on this t see what you have. Maybe even valve timing has jumped, exhaust restriction and so on.

Find out just what you have to work with as you don't seem to really know,

T

Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

May 22, 2015, 4:28 AM

Post #3 of 3 (1125 views)

Re: Very Poor Performance	Sign In

TBI fuel system on that engine doesn't use a MAF sensor. It is speed density which uses a MAP sensor. Does the check engine light work? If is it on, check for codes in the ECM by jumpering A to B in ALDL connector. Count the flashes of the check engine lamp. They will be two digit codes.

First thing you should do is a compression check. Make sure the battery is fully charged and the starter is cranking the engine at a good speed. Unplug the distributor electrical connector and hold the throttle wide open when you do your check. Write down your numbers.

Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on May 22, 2015, 4:29 AM)

Search for (options) Privacy Sitemap