|
|
dave284
Enthusiast
Aug 16, 2008, 10:30 AM
Post #1 of 10
(1836 views)
|
I'm changing the timing belt on a 94 Honda civic 1.6 and wondering if the crankshaft bolt comes off clockwise or counter clockwise....I've been trying to take it off turning the bolt counter clockwise, first with a impact wrench set at 200 psi then a breaker bar and the whole car moves, am I turning the bolt the wrong way? And if not, what is the best way to remove the crankshaft pulley?...I have never encountered this much trouble before.
|
|
| |
|
|
Double J
Veteran
/ Moderator
Aug 16, 2008, 10:53 AM
Post #2 of 10
(1833 views)
|
|
Re: crankshaft bolt
|
Sign In
|
|
Its a regular bolt....turns counter clockwise to remove...but its a sonofagun!
You need a special tool to hold the pulley...and probably a better air compressor and higher torque impact.
The bolt has thread locker on it from the factory and i believe the torque is like in the neighborhood of 180 lb ft or something....
The last 2 i had, one,a Honda ,the other an Acura,i had to send to my buddy at the Honda dealership to remove.
We at first borrowed the dealers tool ,tried with the house compressor,no go.
look at this video...see if this helps you..
Good Luck Buddy!
Remember when auto mechanics was fun!!!!!
Jim
|
|
| |
|
|
way2old
Veteran
/ Moderator
Aug 16, 2008, 2:59 PM
Post #3 of 10
(1828 views)
|
|
Re: crankshaft bolt
|
Sign In
|
|
I have had really good luck with the IR 2131 composite impact. It hits a lot faster than the other impacts and breaks stubborn bolts easier. Just my thought.
Being way2old is why I need help from younger minds
(This post was edited by way2old on Aug 16, 2008, 3:00 PM)
|
|
| |
|
|
dave284
Enthusiast
Aug 16, 2008, 4:07 PM
Post #4 of 10
(1825 views)
|
|
Re: crankshaft bolt
|
Sign In
|
|
Thats what I need, that bolt is really been a pain in the a$$, I tried to find that tool and didn't have any luck...when trying to explain about the tool, people couldn't figure out what I was needing...the Honda place just kept telling me to bring it in and they don't sale that tool, what a bunch of brush-offs. I'm gonna check out that impact and that holding tool...hopefully I can get this job done. Thanks guys, the info was very helpful, I'll post back when I'm finished.Take care.
Dave
|
|
| |
|
|
Jeff Norfolk
Enthusiast
Aug 16, 2008, 7:29 PM
Post #5 of 10
(1821 views)
|
|
Re: crankshaft bolt
|
Sign In
|
|
The tool will do the trick. Next to impossible with out it. I bought mine from my local Snap-on dealer. But any tool distributor should be able to get it for you. Good Luck.
Jeff
|
|
| |
|
|
dave284
Enthusiast
Aug 17, 2008, 10:35 AM
Post #6 of 10
(1812 views)
|
|
Re: crankshaft bolt
|
Sign In
|
|
The snap-on man is real tough to catch around here, he don't return any of my phone calls,and he only shows up when he's desperate to make a sale, anyhow I found the tool at NAPA, cost $47.50 and I had to order it...be in Tuesday. I'm gonna see if I get an account with the Mac-tools, I see their vans everywhere. Thanks Jeff.
Dave
|
|
| |
|
|
dave284
Enthusiast
Aug 19, 2008, 7:23 PM
Post #7 of 10
(1798 views)
|
|
Re: crankshaft bolt
|
Sign In
|
|
That tool done it....after splitting two 17MM sockets, best to use impact sockets...lesson learned, I got a question, I know you pay for what you get, but does name-brand sockets get weak over a length of time?
|
|
| |
|
|
Jeff Norfolk
Enthusiast
Aug 19, 2008, 7:55 PM
Post #8 of 10
(1797 views)
|
|
Re: crankshaft bolt
|
Sign In
|
|
In my experience yes. Especially if you are using them on air tools. By something with lifetime warranty so you only have to buy them once. Trade them in when needed.
Jeff
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Aug 20, 2008, 5:26 AM
Post #9 of 10
(1794 views)
|
|
Re: crankshaft bolt
|
Sign In
|
|
Gotta laugh! My experience with "Lifetime" warranties is they are betting I'll die before the tool or a part breaks!
Anyone out there need the tool that removes lower ball joints from a Corvair?
T
|
|
| |
|
|
Jeff Norfolk
Enthusiast
Aug 20, 2008, 4:03 PM
Post #10 of 10
(1789 views)
|
|
Re: crankshaft bolt
|
Sign In
|
|
LOL. Not right now but good to know where I can get one.
Jeff
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
