|
|
amygrindstaff
User
Dec 28, 2009, 5:43 PM
Post #1 of 15
(5540 views)
|
clicking sound in engine
|
Sign In
|
|
2000 Toyota 4runner 3.4 V6 4x4 mileage 106,000 I have a 2000 4 runner with 106,000 miles and two weeks ago on a very cold day it started making a clicking sound (described by some users as a baseball card in a bicycle tire) but only does this when accelerating and the faster you go the faster the clicking sound is. I cannot hear it when idleing. This sound did not occur again until today (two weeks later) and it is very cold. Only in acceleration again and stopped after approximately 10 min. We have checked the oil and it is not low and is clean. the car is not due for an oil change for another 2000 miles. i haven't had this car very long. . any thoughts or suggestions will be appreciated.....
|
|
| |
|
Sidom
Veteran
/ Moderator
Dec 28, 2009, 6:29 PM
Post #2 of 15
(5524 views)
|
Re: clicking sound in engine
|
Sign In
|
|
Does this only make the sound when driving or can you get the engine to make the noise reving it in neutral?
|
|
| |
|
amygrindstaff
User
Dec 29, 2009, 6:57 AM
Post #3 of 15
(5506 views)
|
Re: clicking sound in engine
|
Sign In
|
|
Honestly I am not sure.......When I am driving and accelerating it pecks but when I let off the gas, it stops.........the harder I mash the gas the faster the peck is.......but it has only done this to me two times. The first time was two weeks ago and yes I believe it did do it while sitting in the parking lot the last time. So far it has only done this after setting in the cold for approximately five - six hours. I keep it in the garage most of the time. It seems to stop after the car warms up. I called the dealer today who informed me it was 'normal' and it was the fuel injectors doing it. THis was a phone diagnosis only.
|
|
| |
|
Sidom
Veteran
/ Moderator
Dec 29, 2009, 9:33 PM
Post #4 of 15
(5500 views)
|
Re: clicking sound in engine
|
Sign In
|
|
While injectors do make noise you really shouldn't be hearing it inside the cab.. Over the phone or even internet diagnosing can be dicy just due to the fact the vehicle isn't in front of you.... Really the 1st two things that popped into my mind was either a lifter that was losing it's prime while sitting over night, or an exhaust leak. The real only sure fire way to nail it down is to leave it overnight at a shop & have a "trained ear" listen to it..........
|
|
| |
|
amygrindstaff
User
Dec 31, 2009, 10:33 AM
Post #5 of 15
(5491 views)
|
Re: clicking sound in engine
|
Sign In
|
|
Thanks so much for your thoughts. My first thought was lifter as well. They want $85 to look at it and the sound is untimely, not sure how to be sure they hear it. Wish me luck ! HAPPY NEW YEARS!
|
|
| |
|
Sidom
Veteran
/ Moderator
Dec 31, 2009, 12:17 PM
Post #6 of 15
(5489 views)
|
Re: clicking sound in engine
|
Sign In
|
|
Yea intermittents can be tough....They're like kids & don't act up when you take them in. One thing you could try on you own 1st since the mileage isn't to high on the vehicle, is to flush the engine & change the oil to see if that helps. They have motor flushes at the parts stores, just put it in the engine, run it for 10 to 15 minutes & then change the oil & filter. I would take off the oil cap and look inside the valve cover to see if there was excessive sludge build up, it there is, then I would hold off on the flush. In cases with excessive build up you may do more harm than good. Good luck & Happy New Years to you as well..........be safe
|
|
| |
|
amygrindstaff
User
Jan 1, 2010, 9:20 PM
Post #7 of 15
(5481 views)
|
Re: clicking sound in engine
|
Sign In
|
|
Well an update to the noise.... it is more frequent and doing it now even when the car is hot. the noise seems to be on the passenger side (i think) and as before, only occurs during aceleration BUT.... it does not make it when in neutral and mashing the gas, only in a pull. just coasting down the highway, you don't hear it but as soon as aceleration is needed it starts. It's very cold here and as soon as I can, we are going to change the oil. It isn't due for another 2,000 miles but..... thanks !!!!!!
(This post was edited by amygrindstaff on Jan 1, 2010, 9:23 PM)
|
|
| |
|
jason32038
User
Jan 9, 2010, 4:23 AM
Post #8 of 15
(5447 views)
|
Re: clicking sound in engine
|
Sign In
|
|
Might be an exhaust leak. Has the exhaust gotten a bit louder since this ticking started? Could also be a loose hose on the emissions A.I.R. system.
|
|
| |
|
brager
User
Jan 9, 2010, 4:51 AM
Post #9 of 15
(5445 views)
|
Re: clicking sound in engine
|
Sign In
|
|
as sugested look at the exhaust especially the heat shields make sure there not rubing or in contact with the exhaust if that checks out ok you might have something internaly thats starting to show some wear or even a lifter thats got a little sludge NOW if this truck has had its frequent oil/filter changes done on a regular basis? i wouldent hesitate for a moment to add a bottle of rislone to the oil just make sure! 1st you drain about a liter of your own oil out 1st! then add the rislone to your engine and run it for about 15-20 minutes and drain it see if that helps keep us posted.
|
|
| |
|
amygrindstaff
User
Jan 10, 2010, 5:01 PM
Post #10 of 15
(5429 views)
|
Re: clicking sound in engine
|
Sign In
|
|
Just wanted to say thanks for your thoughts....just got a run around from the dealer at this point. the mechanic said possible exhaust leak but then said he couldnt find anything or hear anything...everyone that gets in it hears it, except the mechanics... odd huh.... i am about at my witts end and ready to drive it until it falls apart!!! very frustrating! thanks again for your help....i am still on the search for a cure....
|
|
| |
|
fastcashforjunkcars
New User
Jan 12, 2010, 1:27 PM
Post #11 of 15
(5412 views)
|
Re: clicking sound in engine
|
Sign In
|
|
Keep the car cool while you search for the leak. As the car heats up, metal expands, which can close small leaks. Ask a friend to cover the tailpipe to force the exhaust through any leaks. Feel for leaks by running your hand near the exhaust system, without touching it. You don't want to burn yourself on these extremely hot parts. Isolate the engine noise from the sound of the leak using a mechanic's stethoscope. Listen for the rush of escaping exhaust. You may need to replace the solid probe portion with tubing to maneuver in the area better and hear the exhaust noises. Inspect the exhaust pipe where it bends over the rear axle, as this is a common area for cracks and leaks. Leaks tend to occur more often on pipes that are bent or exposed. Start your hunt at the engine and follow the exhaust system all the way to the end of the tail pipe. Thoroughly check all connectors along the way, as these areas commonly have leaks. Inspect the exhaust manifold for cracking. This may require removing parts of the exhaust system and engine. Cracking and warping of the manifold is quite common, especially with older cars Check the gaskets. This tends to be the most common cause of leaks. If you have an older car, your gasket connecting the manifold to the cylinder head may have cracked during normal use. Touch rusty areas on pipes and mufflers to see whether the rust is surface or goes all the way through the part. Areas weakened by rust often cause leaks. No links allowed
(This post was edited by Sidom on Jan 12, 2010, 8:28 PM)
|
|
| |
|
amygrindstaff
User
Jan 13, 2010, 9:09 AM
Post #12 of 15
(5402 views)
|
Re: clicking sound in engine
|
Sign In
|
|
great tips......THANKS! was a the dealer again yesterday and now they say corroded values from bad gas and easy driving.... told me to use premium and run it hard and see what happens .........BUT he still said it could be an exhaust leak!?!?!? I have had it at the Toyota dealership three times now with no real luck. I put premium in it yesterday and it clicked clicked clicked last night but I didn't hear it this morning.... just no pattern to it I am afraid. I really hope they are right and good gas is the simple fix but I am not holding my breath. I know a tad about cars and to me, and everyone I have described it to, it sounds like a lifter pecking but the mechanic told me yesterday that Toyota 4 Runners didn't have lifters ....... The car is a 2000 Toyota 4 Runner with 106,000 miles. I worried about the high miles but was assured that on a Toyota, 100,000 was nothing to worry about so.... i traded in a Ford with 26,000 miles.. starting to wish I hadn't.... Thanks again for all of the information. HAVE A GREAT DAY!
|
|
| |
|
amygrindstaff
User
Jan 15, 2010, 8:45 AM
Post #13 of 15
(5389 views)
|
Re: clicking sound in engine
|
Sign In
|
|
Well the premium gas did nothing......surprised? I am not. At this point I feel like a fool going back to the dealership so I am going to drive the car until something actually breaks.... just not sure what else to do........THANKS EVERYONE for your help and suggestions..............
|
|
| |
|
asleepatdawheel
User
Jan 18, 2010, 2:21 AM
Post #14 of 15
(5373 views)
|
Re: clicking sound in engine
|
Sign In
|
|
I would actually not go back to this dealer if they have not gotten some kind of clue after three times... When its cold you might want someone with some experience,, pull the valve covers and see if there are any loose components there... Thats one way to check valve train components for anything not adjusted properly.. Also when checking for exhaust leak,, after startup check then as it get warmer then metal will expand an harder to find leak... ----------------------------------------------------------- Its not called bragging,, if you can back it up....
|
|
| |
|
amygrindstaff
User
Jan 21, 2010, 7:42 AM
Post #15 of 15
(5359 views)
|
Re: clicking sound in engine
|
Sign In
|
|
NEW TWIST to Toyota saga................ Finally warmed up here above freezing and the four runner hasn't pecked (clicked?) since!!!!!!!!!!!!!!!!!!
|
|
| |
|