|
|
jp
New User
Jul 15, 2009, 8:14 AM
Post #1 of 1
(1445 views)
|
|
engine not firing
|
Sign In
|
|
I have a 1997 chryler town and country van 3.8 v6 Had a p0320 trouble code so i installed a new cam sensor. eng. stii wouldn't start. I then reinstalled old sensor and eng. still won't start. I checked all fuses and found none were blown. I have at least determined that 2 of the mateing ignition coils will fire 3 times on initial crank over and then they will stop firing. They will again fire 3 times on every initial crank over and then quit. the other 4 cyl's (2 additional coils in the coil pack) will never fire, even a new coil does the same thing. The coil pack has 4 wires going to it, 1 is ignition hot, the other 3 are refrence feeds from the PCM. All seem to be inergizing properly. Tried a new crank sensor as well, no change.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 