Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









engine stalled


Search for (search options)
 



humphrey
New User

Apr 15, 2012, 6:01 AM

Post #1 of 7 (3431 views)
engine stalled Sign In

I have a jeep liberty 2006, engine 3.7L. I know that the catalytic converter is damaged,because i struck the underside going over a huge rock.My problem is while driving with the damaged cat. the engine stalled and would not restart. On checking i found some oil in the air intake and filter. would the damaged cat. caused the engine to stall and what caused oil to enter the air intake?


nickwarner
Veteran / Moderator
nickwarner profile image

Apr 15, 2012, 9:50 AM

Post #2 of 7 (3371 views)
Re: engine stalled Sign In

The oil is likely blowby going through your PCV which draws into the air intake. The PCV valve may need replacement, a cheap and simple fix. The cat is another matter entirely. If its damaged badly the honeycomb in it breaks up and the thing plugs. It won't allow the exhaust gasses to go out. Think of it as trying to breathe through a drinking straw. It definately will stall you out and cause big trouble. Its not cheap but is necessary to repair it before you drive around anymore.


humphrey
New User

Apr 15, 2012, 10:18 AM

Post #3 of 7 (3366 views)
Re: engine stalled Sign In

Thanks for the answer. Seems a very logic answer. I bought a new direct fit Cat. Cost me $500. should have it by Tuesday also i bought the four O2 sensors.I'll check the PCV valve and change if necessary.Please tell me where is the PCV valve located.


kev2
Veteran
kev2 profile image

Apr 15, 2012, 2:54 PM

Post #4 of 7 (3336 views)
Re: engine stalled Sign In

PCV is located on the FILL TUBE...
Always tell if the CEL is on and if you know codes
will add image as soon as I figure out how to


humphrey
New User

Apr 15, 2012, 3:11 PM

Post #5 of 7 (3332 views)
Re: engine stalled Sign In

thanks, I'll know what to look for. I'll you guys posted on how and if i solve the problem. Thanks again to all.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Apr 15, 2012, 3:45 PM

Post #6 of 7 (3327 views)
Re: engine stalled Sign In





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



humphrey
New User

Apr 15, 2012, 4:26 PM

Post #7 of 7 (3317 views)
Re: engine stalled Sign In

Thanks for the diagram showing me the PCV valve.






 
 
 






Search for (options) Privacy Sitemap