|
|
teri
User
Aug 8, 2014, 5:50 PM
Post #1 of 12
(1599 views)
|
I replaced a engine on my 05 dodge Durango 4.7l, with a 05 dodge ram 1500 4.7, but engine wont turn over I replaced the starter with ram 1500 starter while I have it torn apart do I need to replace the flywheel also with a dodge ram flywheel . I really need help on this one.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 8, 2014, 6:15 PM
Post #2 of 12
(1592 views)
|
Re: flywheel help
|
Sign In
|
|
Which transmission did the Ram have? Is the Ram 4wd or 2wd? Is the Durango 4wd or 2wd? Did you compare the flywheels to be sure they are the same? They should be, of course. When you mean turn over, do you mean the starter isn't activating or the starter is activated, but doesn't spin the crank? I don't think the starter from the Ram will work on the Durango because it is bolted to the passenger side on the Durango and on the driver's side on the Ram and they both have different drive gears. Durango starter clocking and gear: Ram 1500 Auto starter: Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Aug 8, 2014, 7:00 PM)
|
|
| |
|
teri
User
Aug 8, 2014, 7:22 PM
Post #3 of 12
(1574 views)
|
Re: flywheel help
|
Sign In
|
|
thanks for the help to answer your question they are both 2WD, and the starter activates but dosen"t spin the crank. The clerk at the part store recommended I put on the ram starter since I am in putting the ram eng. I hope he is right
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 9, 2014, 6:37 AM
Post #4 of 12
(1561 views)
|
Re: flywheel help
|
Sign In
|
|
I have a feeling the Ram's starter on the Durrango isn't going to work. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
teri
User
Aug 10, 2014, 11:28 AM
Post #5 of 12
(1538 views)
|
Re: flywheel help
|
Sign In
|
|
I need help with this problem as I stated before replaced an engine in a 05 dodge Durango with a 05 dodge ram 1500 same engine 4.7 all that was changed was the oil pan a suction pump and bolted to the trans ok now the starter activates but wont turn engine over tried switching starter from Durango to dodge ram it wont fit. hot battery and new starter applied
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 10, 2014, 1:32 PM
Post #6 of 12
(1531 views)
|
Re: flywheel help
|
Sign In
|
|
Just curious, but what happened to the original engine? Did you have the same issue with the starter on the old engine? Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
kev2
Veteran
Aug 10, 2014, 1:38 PM
Post #7 of 12
(1530 views)
|
Re: flywheel help
|
Sign In
|
|
you installed the 05 ram engine did the starter come with the engine? you have NOT switched flywheels have you? hopefully replacement engine was NOT a junk yard find- I would confirm the dodge ram is what it was claimed to be- year model etc...
|
|
| |
|
teri
User
Aug 12, 2014, 8:38 PM
Post #8 of 12
(1504 views)
|
Re: flywheel help
|
Sign In
|
|
the starter worked fine in old engine
|
|
| |
|
teri
User
Aug 12, 2014, 8:45 PM
Post #9 of 12
(1503 views)
|
Re: flywheel help
|
Sign In
|
|
the dodge ram engine was purchases used on line they confirmed the year, model etc. it didn't come with a starter, I am using my old flywheel since it didn't come with one
|
|
| |
|
nickwarner
Veteran
/ Moderator
Aug 13, 2014, 9:35 PM
Post #10 of 12
(1490 views)
|
Re: flywheel help
|
Sign In
|
|
Before you play musical starters, have you tried putting a breaker bar on the crank pulley and seeing if this engine is locked up? Online can be a great place for deals but its also a great place for scammers to unload junk on people and take their money.
|
|
| |
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Aug 14, 2014, 1:05 AM
Post #11 of 12
(1488 views)
|
Re: flywheel help
|
Sign In
|
|
So right Mr. Nick. Seller confirmed the thing so it must be right. Guess not huh? T
|
|
| |
|
teri
User
Aug 23, 2014, 5:46 PM
Post #12 of 12
(1442 views)
|
Re: flywheel help
|
Sign In
|
|
Update-e advices -- I wish to thank all for their in put it was helpful , I was finally informed there is no way for that engine to work since the starters are opposite sides so I have to return it and request one for the durnago. Again thanks or your help
|
|
| |
|