|
| | |
|
peachm1972
Novice
Jul 28, 2008, 6:43 PM
Post #1 of 2
(1371 views)
|
1991 corsica, put a ignition module on, put the new coils on, even put a crank senser on, w/ new plugs and wires,,.? but i have no spark of any , nor do i have gas coming through the throttle body when my son cranks it!! now i used a paperclip to run the old style (check engine) flash code, (23), 1-2-1-2-1-2-2-3-2-3-2-3,(12) means all systems go) ran it five times,, i dont know what else could cuase a car not to have any fire whatsoever nor have fuel,, 4 days ago it would only start here and there, but after it started and i cut it off, would not start back, thats why i went w/ all new electrical parts, but now it wont hit a lick, just turns over and over.. there is no theft on that model so thats out the window. even a cam senser would stop the fire, but not the spark that i would think.. if anyone knows what code (23) means or could help me in any way. please do, god bless.. chris and heather m. p.s., i am leaning to buying a new computer, does anyone know if that sounds like the problem???
|
|
| |
|
way2old
Veteran
/ Moderator
Jul 29, 2008, 4:29 AM
Post #2 of 2
(1368 views)
|
Here is the definition of the code 23 Inlet air temperature sensor signal showed an air temperature below -31� F after the engine had been running for 2 minutes (9 minutes for Beretta & Corsica engine).It may be possible the sensor has come unplugged. Being way2old is why I need help from younger minds
|
|
| |
|