|
|
chrisivy
New User
Aug 21, 2008, 2:13 PM
Post #1 of 6
(1361 views)
|
 is there a way to remove a spark plug that a cross thread bolt without taking it out at the head. if it does have to be taken out at the head, what is the average cost for a job like this. 1999 Ford Expedition, 5.4 engine
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Aug 21, 2008, 3:29 PM
Post #2 of 6
(1358 views)
|
I'm a bit confused. Is the plug in there now and presumed stuck and cross threaded? Did a plug break right off leaving threads in the original hole or just what has happened??
T
|
|
| |
|
|
chrisivy
New User
Aug 21, 2008, 3:48 PM
Post #3 of 6
(1352 views)
|
Reply to Tom Greenleaf: The plug is still in there. I took it in to get spark plugs put in. The mechanic says that he couldn't get the number 4 spark plug out, because the bolt was cross threaded. It wasn't missing that day, but he said that it might start misfiring. After about a week my truck starting missing pretty bad, and then my engine light came on. I took it to the mechanic to check it out and diagnosis was #4 plug misfiring. The mechanic said this would be a costly repair, because the plug would have to be taken out at the head.
|
|
| |
|
|
way2old
Veteran
/ Moderator
Aug 21, 2008, 5:22 PM
Post #4 of 6
(1349 views)
|
Is it the spark plug that is cross threaded, or the little bolt that holds the coil in place? I do not think the spark plug has been cross threaded. It may be rusted in place and hard to remove. A competent technician should be able to remove it using a little time and lubricants they have available.
Being way2old is why I need help from younger minds
(This post was edited by way2old on Aug 21, 2008, 5:23 PM)
|
|
| |
|
|
chrisivy
New User
Aug 21, 2008, 5:36 PM
Post #5 of 6
(1345 views)
|
 It is the bolt. Your reply makes me feel a little better about the situation. Thank you
|
|
| |
|
|
way2old
Veteran
/ Moderator
Aug 21, 2008, 6:01 PM
Post #6 of 6
(1343 views)
|
If it is the bolt that holds the coil, it can be removed and a self tapping bolt installed. Not a big thing. It is done quite often. Good luck.
Being way2old is why I need help from younger minds
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
