|
|
tes
User
Nov 25, 2013, 6:01 PM
Post #1 of 2
(1463 views)
|
Hi guys. it's a 2003 CRV 2.4 engine any ideas how to replace the starter motor thank you very much.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 25, 2013, 6:29 PM
Post #2 of 2
(1453 views)
|
Starter Replacement
- Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons.
- Disconnect the battery negative cable, then disconnect the positive cable.
- Disconnect the knock sensor connector.
- Disconnect the bolt securing the harness bracket.Disconnect the starter cable (A) from the B terminal on the solenoid, then disconnect the BLK/WHT wire (B) from the S terminal.
- Remove the two bolts holding the starter, then remove the starter.
- Install the starter in the reverse order of removal. Make sure the crimped side of the ring terminal (A) is facing out.
- Connect the battery positive cable and negative cable to the battery.
- Start the engine to make sure the starter operates properly.
- Enter the anti-theft code for the radio, then enter the customer's radio station presets.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
| | |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 