|
|
wranglerman
Novice
Nov 27, 2010, 5:22 PM
Post #1 of 7
(1877 views)
|
truck backfires no power
|
Sign In
|
|
hi i have a 1987 chevy wrangler pick up with a 5.7 engine the km are 326874 on truck not exactly sure on rebuild but was told around 50000km. The problem is the motor back fires through the tbi. Yes i have checked the timing its fine but also iv noticed the lights dim when this happens the motor seems to also lose power than the lights brighten and also the power p[cks up. Was wondering if problem could be in the computer or maybe the advance in the distributor maybe there is a sensor that sends a signal to the computer to advance the timeing????? this i dont know can some one please help me
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 27, 2010, 5:42 PM
Post #2 of 7
(1866 views)
|
Re: truck backfires no power
|
Sign In
|
|
Check all you power supply points like the battery cables, power distribution points (starter), fuse boxes and ignition switch. Look for contacts that have been overheated and are no longer making a good contact. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Nov 27, 2010, 5:42 PM)
|
|
| |
|
wranglerman
Novice
Nov 27, 2010, 5:52 PM
Post #3 of 7
(1859 views)
|
Re: truck backfires no power
|
Sign In
|
|
thanks for replying i have checked the power points found the post on starter solinoid had worn down so i was able to rotate it and get a good contact.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 27, 2010, 5:55 PM
Post #4 of 7
(1855 views)
|
Re: truck backfires no power
|
Sign In
|
|
We're not talking about starter operation here. we're looking at operating power which feeds from the fusible links at the starter. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
wranglerman
Novice
Nov 27, 2010, 6:07 PM
Post #5 of 7
(1851 views)
|
Re: truck backfires no power
|
Sign In
|
|
well as i said i checked for any thing that didnt seem right but realy didnt find anything. WAS thinking may be the voltage regulator had the service engine light come on but had it read and apparently it was a code 12 ?? was told probly bacause the ac ahs been disconnected???
|
|
| |
|
wranglerman
Novice
Nov 28, 2010, 2:43 PM
Post #6 of 7
(1840 views)
|
Re: truck backfires no power
|
Sign In
|
|
ok i rechecked all my power points the only thing i have out of the ordinary is the delay on my wipers dont work could this possibly cause a problem????? sorry did not realize you could only post once! as i had asked is there some sort of sensor for cold start ups as i have noticed when it gets colder the problem gets worse untill the truck warms up??? once again i appoligize
(This post was edited by wranglerman on Dec 2, 2010, 7:37 AM)
|
|
| |
|
weezer
Novice
Dec 2, 2010, 8:45 PM
Post #7 of 7
(1818 views)
|
Re: truck backfires no power
|
Sign In
|
|
Don't know about lights dimming, or temp loss of power, but a flat camshaft lobe can cause backfire especially when accelerating.
|
|
| |
|