|
|
|
vw golf mk3 1.9D crankshaft
|
|
|
| |
|
|
Fazen
New User
Jul 3, 2020, 3:27 AM
Post #1 of 9
(2139 views)
|
|
vw golf mk3 1.9D crankshaft
|
Sign In
|
|
Hi, I have a mk3 golf 1.9D engine that does not get syncronized.
The problem started when i replaced the timing belt, and after a couple of days, while driving, the engine stopped after making a deep impact noise. After inspection, I found a synchronization problem, which doesn't get corrected. Every time I do the timing, I find the belt shifted. Then I realized that I could turn the flywheel for about 2 deg.
with the crankshaft pinion blocked.
My conclusion is: if the crankshat is an assembled part, then maybe a machinist can do something, otherwise, mine is broken and need to be changed.
Any help would be appreciable.
Thank you.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 3, 2020, 3:46 AM
Post #2 of 9
(2126 views)
|
|
Re: vw golf mk3 1.9D crankshaft
|
Sign In
|
|
Not sure what you are trying to describe here but the crankshaft is a solid piece of steel with a flywheel bolted to one end and a balancer bolted to the other end and they should all move as one piece.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Fazen
New User
Jul 3, 2020, 3:52 AM
Post #3 of 9
(2122 views)
|
|
Re: vw golf mk3 1.9D crankshaft
|
Sign In
|
|
ok then, if you could move the flywheel which is bolted to the crankshaft without having the crankshaft pinion moving, then the crankshaft must bu broken !
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 3, 2020, 3:58 AM
Post #4 of 9
(2118 views)
|
|
Re: vw golf mk3 1.9D crankshaft
|
Sign In
|
|
Or the flywheel bolts are loose and egged out or the front keyway is broken.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Fazen
New User
Jul 3, 2020, 4:01 AM
Post #5 of 9
(2114 views)
|
|
Re: vw golf mk3 1.9D crankshaft
|
Sign In
|
|
No, flywheel bolts and front keyway are ok
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 3, 2020, 4:21 AM
Post #6 of 9
(2096 views)
|
|
Re: vw golf mk3 1.9D crankshaft
|
Sign In
|
|
If the flywheel breaks, it will never run again from that point.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Fazen
New User
Jul 3, 2020, 4:27 AM
Post #7 of 9
(2092 views)
|
|
Re: vw golf mk3 1.9D crankshaft
|
Sign In
|
|
what's confusing, is that I removed it last week, and found nothing weird, no sign of any crack or break. But I think I'll just buy a new one rather than take the risk of breaking the engine a second time.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 3, 2020, 5:28 AM
Post #8 of 9
(2071 views)
|
|
Re: vw golf mk3 1.9D crankshaft
|
Sign In
|
|
Buy a new what?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jul 3, 2020, 5:49 AM
Post #9 of 9
(2067 views)
|
|
Re: vw golf mk3 1.9D crankshaft
|
Sign In
|
|
BTT: Sorry if I missed something but OP said crank could be turned 2 degrees and not show at the opposite end of it? "pinion" of a crankshaft? I'm missing something.
Crank is as HT said, balancer at one end, flywheel at the other are fixed as it's make out of one casting of metal once to match the specific ONE block it will be used in.
Can another new be bought? TMK yes but it can't be the same each are to the original block so it's messing with "Mother Nature" if you go there.
Can one split at an angle and still move and work? I've heard of that a ripping once only to a camshaft not to a crank and that engine still ran??
Key at damper or rounded out holes said it in one line if I read this properly says it. Keys mess up, smash, squish in wrong or can shear is possible lawnmower or most involved engine made,
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
