|
|
|
03 focus stalling when hot at intersections
|
|
|
| |
|
|
aaronschultz79
New User
Aug 11, 2013, 11:58 AM
Post #1 of 6
(1803 views)
|
03 focus stalling when hot at intersections
|
Sign In
|
|
I have replaced.the egr,iac,altinator,timeing belt,mass air sensors!..still my 03 focus dohc. Is stalling when hot at intersections..? Does anybody have anymore suggestions. I prommiss i wont argue and take all info into consideration! Please help me[mad]
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 11, 2013, 12:37 PM
Post #2 of 6
(1796 views)
|
|
Re: 03 focus stalling when hot at intersections
|
Sign In
|
|
Check engine light on?
Does it restart right after it stalls out?
Does it only stall out when your foot isn't on the gas?
Is this the SOHC 2.0L?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Aug 11, 2013, 12:38 PM)
|
|
| |
|
|
aaronschultz79
New User
Aug 11, 2013, 1:06 PM
Post #3 of 6
(1790 views)
|
|
Re: 03 focus stalling when hot at intersections
|
Sign In
|
|
Yes check engine light is on. Yesit stalls out coming to a stop or turn after releaseing gass pedal and no it is the z tech dohc 2.0. Thankyou for replying so fast . Ive just replased the dpfe on the fire wall!..
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 11, 2013, 3:16 PM
Post #4 of 6
(1780 views)
|
|
Re: 03 focus stalling when hot at intersections
|
Sign In
|
|
What trouble code(s) is being stored in the engine computer for the check engine light?
Does it start right back up after it had stalled out?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
aaronschultz79
New User
Aug 11, 2013, 4:24 PM
Post #5 of 6
(1770 views)
|
|
Re: 03 focus stalling when hot at intersections
|
Sign In
|
|
The code was p401. Ive cleared it and it hasnt come back yet..and yes it does start back up after stalling.. I have to power brake it to keep it running!!
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 11, 2013, 4:34 PM
Post #6 of 6
(1769 views)
|
|
Re: 03 focus stalling when hot at intersections
|
Sign In
|
|
Few things that could cause it to stall at stops or when coming to a stop without your foot on the gas.
EGR is stuck open. The code you have is a insufficient EGR flow, but it is possible the valve could be staying open when it gets hot at engine idle speeds causing the engine to stall. Easy way to figure that out is to unplug and cap the vacuum line going to the ESM (exhaust gas recirculation system module) vacuum solenoid. Drive the vehicle and see your problem goes away.
Idle air control issue. A faulty idle air control motor or even a dirty throttle body could cause stalling at idle speeds.
TCC staying locked up. Torque converter clutch isn't disengaged while your coming to a stop causing the engine to stall out like a manual transmission would cause an engine to stall out if you didn't disengage the clutch.
Those are some areas to rule out.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
| | |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
