Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




1991 ford aeostar

Search for (search options)
 



speedlod
New User

Nov 2, 2006, 4:10 PM

Post #1 of 5 (1211 views)
1991 ford aeostar Sign In
need to remove igintion switch without key.Have drilled pin out but switch moves no more then 1/4 of inch.Any ideas.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Nov 2, 2006, 8:30 PM

Post #2 of 5 (1205 views)
Re: 1991 ford aeostar Sign In
Do you mean the lock cylinder or the ignition switch. Two different things, They lock cylinder should come out after a dig into steering column with no need to break or drill anything, T



speedlod
New User

Nov 3, 2006, 12:15 AM

Post #3 of 5 (1203 views)
Re: 1991 ford aeostar Sign In
cylinder lock,easy if have key then just turn to run posisition depress pin and pull.But without total differant story.Was hoping someone had been thru this.


Guest
Anonymous Poster

Dec 1, 2007, 2:52 AM

Post #4 of 5 (1158 views)
Re: 1991 ford aeostar Sign In
In Reply To
need to remove igintion switch without key.Have drilled pin out but switch moves no more then 1/4 of inch.Any ideas.


way2old
Veteran / Moderator
way2old profile image

Dec 1, 2007, 9:26 AM

Post #5 of 5 (1155 views)
Re: 1991 ford aeostar Sign In
If you have the lock pin drilled out, use a small slide hammer to remove the cylinder. If you dont have access to that, screw a long screw into the key slot and lock a pair of vice grips to the head of screw. Use a hammer to hit locking pliers to remove the cylinder. Hit real close to the screw head.



Being way2old is why I need help from younger minds





 
 
 






Search for (options) Privacy Sitemap