Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



2006 chev malibu headlight

Search for (search options)
 



JBANKS
User

Dec 17, 2012, 10:53 AM

Post #1 of 2 (3100 views)
2006 chev malibu headlight Sign In
OK NOW I REALLY FEEL OLD!...DOES ANYONE KNOW HOW TO REPLACE A HEADLIGHT IN A 2006 CHEVY MALIBU??
JBANKS


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 17, 2012, 1:12 PM

Post #2 of 2 (3069 views)
Re: 2006 chev malibu headlight Sign In
HEADLAMP ASSEMBLY OR HEADLAMP BULB AND/OR CORNERING, SIDEMARKER, PARK, TURN SIGNAL BULB REPLACEMENT

REMOVAL PROCEDURE

CAUTION: Refer to Halogen Bulb Caution in Service Precautions.

  1. Open the hood.




  1. Remove the bolts from the headlamp assembly.

IMPORTANT: Hold the headlamp to prevent damage to the headlamp or to the fascia.

` 3. Lift the headlamp assembly to unseat the tabs on the bottom and the edge of the fender.



  1. Disconnect the electrical connector from the headlamp assembly.
  2. Remove the headlamp assembly away from the vehicle, if necessary.




  1. Remove the headlamp bulb access cover by rotating the headlamp bulb access cover counterclockwise, if necessary.




  1. Remove the headlamp bulb from the housing by rotating the socket counterclockwise, if necessary.




  1. Disconnect the headlamp bulb electrical connector, if necessary.




  1. Remove the park/turn bulb access cover by rotating the cover counterclockwise, if necessary.




  1. Remove the park/turn bulb from the housing by rotating the socket counterclockwise, if necessary.




  1. Gently pull the park/turn bulb from the socket, if necessary.

INSTALLATION PROCEDURE




  1. Install the park/turn bulb into the bulb socket.




  1. Install the park/turn bulb socket into the headlamp housing by rotating the socket clockwise.




  1. Install the park/turn bulb access cover by rotating the cover clockwise.




  1. Connect the headlamp bulb to the headlamp electrical connector.




  1. Install the headlamp bulb into the headlamp housing. Rotate the socket clockwise until locked.




  1. Install the headlamp bulb access cover by rotating the cover clockwise.




  1. Connect the electrical connector to the headlamp assembly.




  1. Position the headlamp assembly to the vehicle. Ensure that the tabs on the bottom and the fender edge are seated.
  2. Install the bolts to the headlamp assembly.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 2 N.m (18 lb in) .
  1. Close the hood.
  2. Inspect the headlamp alignment. Adjust the headlamp alignment, if necessary. Refer to Headlamp Aiming.




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.






 
 
 






Search for (options) Privacy Sitemap