Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









2006 trailblzer ss headlamp replacement


Search for (search options)
 



Guest
Anonymous Poster
mjdub@mac.com

Feb 24, 2008, 5:36 PM

Post #1 of 3 (1301 views)
post icon 2006 trailblzer ss headlamp replacement Sign In

does the whole assy have to be removed in order to replace halogen bulbs low beam only ?


Double J
Veteran / Moderator
Double J profile image

Feb 25, 2008, 11:21 AM

Post #2 of 3 (1294 views)
Re: 2006 trailblzer ss headlamp replacement Sign In

Here's what ya do....


HEADLAMP BULB REPLACEMENT

REMOVAL PROCEDURE

CAUTION: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:
  • Turn off the lamp switch and allow the bulb to cool before changing the bulb.
  • Leave the lamp switch OFF until the bulb change is complete.
  • Always wear eye protection when changing a halogen bulb.
  • Handle the bulb only by its base. Avoid touching the glass.
  • Keep dirt and moisture off the bulb.
  • Properly dispose of the used bulb.
  • Keep halogen bulbs out of the reach of children.

NOTICE: Avoid touching the bulb or letting the bulb come in contact with anything damp. Oil from your skin or moisture on the bulb can cause the bulb to explode when the bulb is turned on. If either comes in contact with the bulb, clean the bulb with alcohol or a suitable de-greaser and wipe the bulb dry.

  1. Open the hood.


  1. Remove the access cover from the rear of the headlamp.
  2. Rotate the bulb and socket counterclockwise in order to remove the bulb and socket from the housing.
  3. Disconnect the electrical connector from the socket.

INSTALLATION PROCEDURE

IMPORTANT:
  • Replace a high beam bulb with another high beam bulb. The high beam bulb has a black socket.
  • Replace a low beam bulb with another low beam bulb. The low beam bulb has a gray tip and a gray socket.


  1. Connect the electrical connector to the socket.
  2. Position the bulb and socket to the headlamp.
  3. Install the bulb and socket to the housing by rotating the bulb and socket clockwise, locking the retaining tabs to the housing.
  4. Install the access cover to the rear of the headlamp assembly



DrElectrics
Enthusiast
DrElectrics profile image

Feb 25, 2008, 4:29 PM

Post #3 of 3 (1290 views)
post icon Re: 2006 trailblzer ss headlamp replacement Sign In

Not the entire assembly. Just the globe. Follow the instructions provided, you'll be rollin in no time.






 
 
 






Search for (options) Privacy Sitemap