|
|
|
2008 Pontiac G6 2.4 61.7k miles
|
|
|
| |
|
|
jmoran4656
Novice
Dec 5, 2013, 9:20 AM
Post #1 of 9
(2429 views)
|
|
2008 Pontiac G6 2.4 61.7k miles
|
Sign In
|
|
Hello everyone,
I have a CEL on and I took it to AutoZone for a free diagnostic. I just recently bought the car, 3 days ago but i bought it as is. The error code it gave me was P0013 Exhaust Camshaft Position Actuator Solenoid
Now I have been looking into this, but i cant seem to find the solenoid part so i can change it. I am new to fixing cars but from what i have found, its not a hard part to change. Is there anyone who can point me in the right direction on what to fix first or what to look for?
Thanks in advance.
|
|
| |
|
|
jmoran4656
Novice
Dec 5, 2013, 9:39 AM
Post #2 of 9
(2416 views)
|
|
Re: 2008 Pontiac G6 2.4 61.7k miles
|
Sign In
|
|
The full readout of P0013 was Camshaft Position actuator solenoid fault, the ecm has detected or short circuit condition in the CMP actuator solenoid. Probable cuase open or short circuit condition, failed cmp actuator solenoid.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 5, 2013, 9:51 AM
Post #3 of 9
(2413 views)
|
|
Re: 2008 Pontiac G6 2.4 61.7k miles
|
Sign In
|
|
It's #5
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jmoran4656
Novice
Dec 5, 2013, 10:02 AM
Post #4 of 9
(2410 views)
|
|
Re: 2008 Pontiac G6 2.4 61.7k miles
|
Sign In
|
|
And the solenoid to replace should be below that eletrical component?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 5, 2013, 10:19 AM
Post #5 of 9
(2405 views)
|
|
Re: 2008 Pontiac G6 2.4 61.7k miles
|
Sign In
|
|
That is the solenoid.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jmoran4656
Novice
Dec 5, 2013, 10:20 AM
Post #6 of 9
(2402 views)
|
|
Re: 2008 Pontiac G6 2.4 61.7k miles
|
Sign In
|
|
so it is the sensor on top that is the solenoid, not the Oil Control Valve?
|
|
| |
|
|
jmoran4656
Novice
Dec 5, 2013, 11:02 AM
Post #7 of 9
(2394 views)
|
|
Re: 2008 Pontiac G6 2.4 61.7k miles
|
Sign In
|
|
link deleted ................... not allowed
This is the solenoid?
(This post was edited by Hammer Time on Dec 5, 2013, 12:21 PM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 5, 2013, 12:22 PM
Post #8 of 9
(2383 views)
|
|
Re: 2008 Pontiac G6 2.4 61.7k miles
|
Sign In
|
|
You can't post links here.
It was the right solenoid but that one was for the intake side. I don't know if they are the same for exhaust.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jmoran4656
Novice
Dec 5, 2013, 1:29 PM
Post #9 of 9
(2374 views)
|
|
Re: 2008 Pontiac G6 2.4 61.7k miles
|
Sign In
|
|
They do actually, I have found the parts on a AC Delco site.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
