|
|
|
94 ford ranger starting issues
|
|
|
| |
|
|
Maintgal
New User
Jan 6, 2013, 4:18 PM
Post #1 of 2
(1602 views)
|
|
94 ford ranger starting issues
|
Sign In
|
|
4 cyl 2.3. When I turn the ignition key I do not have any lights and the chime does not sound for the door open. If I continue to attempt to start nothing happens, no lights or sounds. I have replaced the ignition switch and positioned it utilizing the ohm meter for each key cylinder position. I have relapsed the battery, and the starter relay. The starter relay has 4 terminals rather than the three from the original so I would think the extra terminal is for ground rather than using the mountain plate. At this point nothing has changed. Pulled the starter off and the bearings were grinding. The truck started once, all started as normal. Had the original starter relay, new battery, and new starter. Gauges looked good and engine sounded fine. Turned it off and attempted to start again. Nothing back the beginning of no lights or chime. Any suggestions as to what to look at next?
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jan 6, 2013, 5:34 PM
Post #2 of 2
(1563 views)
|
|
Re: 94 ford ranger starting issues
|
Sign In
|
|
Battery cable connection at battery, solenoid or ground to engine can do that,
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 