Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




Code P0087 on 2012 Kia Optima

Search for (search options)
 



JLighthill
User

Oct 27, 2016, 9:53 AM

Post #1 of 3 (6315 views)
Code P0087 on 2012 Kia Optima Sign In
Customer asked me to put in a new fuel pump in a 2012 Kia Optima 2.4. Old pump didn't have enough pressure. Losing power while driving. New pump, pressure up, but takes while to crank. . It takes 5-6 times to turnover before cranking. Not losing power, got power. Pulling code P0087. Car is idling fine. I have checked the fuses, no kinks in lines, injectors are going good. Check engine light is on. What would I need to check next? Can't find a fuel pressure regulator online or in store! Thanks in advance.


(This post was edited by JLighthill on Oct 27, 2016, 9:56 AM)


kev2
Veteran
kev2 profile image

Oct 27, 2016, 10:05 AM

Post #2 of 3 (6309 views)
Re: Code P0087 on 2012 Kia Optima Sign In
P0087 is a LOW fuel pressure issue- SO getting started -what is actual fuel pressure - new is not always good, did you use a KIA pump or aftermarket?
With KOEO observe fuel pressure peak and then observe pressure drop off ie drops xpsi in 5minutes.
WIth scanner be sure to look at ECT, FT's and o2 voltages to confirm low pressure volume issue... t want to check TSB
MIght want to look at TSB's I think #'s FUE 026, SC 114 both for this code.


(This post was edited by kev2 on Oct 27, 2016, 10:14 AM)


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Oct 27, 2016, 11:23 AM

Post #3 of 3 (6299 views)
Re: Code P0087 on 2012 Kia Optima Sign In
Which pump did you replace?

Quote
General Description

The Low Pressure Pump (LPP) supplies 65 psi(4.5 bar) of fuel pressure to the High Pressure Pump (HPP).
Using the internally located Fuel Pressure Regulator Valve (FPR), the HPP will boost the fuel pressure from 580 psi(40 bar) at idle to a maximum of 1958 psi(135 bar).
The Fuel Pressure Sensor (FPS) confirms the fuel pressure and returns the signal to the Powertrain Control Module (PCM).
Fuel pressure during limp-home mode is 65 psi(4.5 bar).

DTC Description

P0087 is set when the fuel pressure drops to 0 psi(0 bar) or below.

What does the fuel pressure say on your scan tool? If the engine is running and the PCM sees 0 psi for more than 5 secs, it will set that code.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Oct 27, 2016, 11:31 AM)





 
 
 






Search for (options) Privacy Sitemap