Directional signal malfunction - Car Troubleshooting


	Auto Repair Home	SEARCH POSTS	WHO'S ONLINE	LOG IN

Automotive Repair

Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:
  Login
  Sign up here!

Latest Forum Post

Lukewarm Heat............

New antifreeze reverse flush heater core...

multiple warning lights

2013 GMC Terrain 130,000 miles 4 cylinde...

2014 Nissan Sentra Shaking

Car recently started shaking when accele...

Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086

N/A

1989 toyota pickup 3.0 crank no start

I have a 1989 toyota pickup 3.0 crank no...

Strut spring orientation and strut mount tension nut

2017 Nissan rogue awd 2.5 L Put in Monro...

Transmission stuck in part, I have tried everything

So I'm working on my elderly fathers 201...

2017 dodge journey LED headlights on/off randomly

Year of vehicle 2017 Make of vehicle dod...

Kia Soul starter replacement issues!

Okay so my car is a 2010 Kia soul 2.0 en...

Please Help - Knock sound & engine fail

Hi all, Hoping to get some insight and ...

Directional signal malfunction

Sign up here!

Search for (search options)

Auto Repair Home>> Automotive Repair>> Car Troubleshooting

C_Crossfire1
New User

Apr 9, 2019, 11:23 AM

Post #1 of 4 (1201 views)

Directional signal malfunction	Sign In

I have a Chrysler Crossfire (2004) I changed the bulbs directional signals and neither one of them blink but they work. I also checked the fuses but I am stumped as to why they do not work.

Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 9, 2019, 12:39 PM

Post #2 of 4 (1190 views)

Re: Directional signal malfunction	Sign In

? Not strong in these cars but an idea. Probably either one relay/flasher for both directionals and hazards lights if neither work at least look at it. If not using that type it's using the vehicle's control module and a code reading will likely show up gives some direction to chase down. May need the highest end code reader there is not just any.
Just a question - Did any sockets look overheated or in trouble in any way? It's totally possible one shorts or sends voltage back and all hell breaks loose,

T

C_Crossfire1
New User

Apr 9, 2019, 3:23 PM

Post #3 of 4 (1174 views)

Re: Directional signal malfunction	Sign In

No the fuses don't seem to have gotten that bad but I'll look into the relay/ flashers to see what I can learn but that's a start.. Thanks

Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 9, 2019, 4:09 PM

Post #4 of 4 (1167 views)

Re: Directional signal malfunction	Sign In

If troubles with just flasher or two of them is doubtful look up parts for this see what it asks, or comes up with nothing. There are electrical parts that do move inside or the show stops for that item.
Relays are another. They allow for a higher draw of current away from the source that triggers it to work just so less heavy wiring can be routed.
Do check fuses with a test light and for continuity not just looks. So far not super common but some are not making the connection but look fine to your eyes.
Many vehicles have a couple spares marked at such in fuse box or center for them just if you do only use exact rated fuse NOT a stronger one is a higher number.
Good old owner's manual may be helpful on locations for each item(s) covered by fuse or relay hope you have it original to the specific car.

Good luck see what you can find and hope it's just something silly many things are just that,

T

Search for (options) Privacy Sitemap