|
|
engin
New User
Jun 17, 2011, 6:08 PM
Post #1 of 2
(1352 views)
|
ECU reprograming
|
Sign In
|
|
Year 2008
Make of vehicle Chevrolet
Model of vehicle Caprice
Kilometers 16028K
Hi ALL
I have problem with my car Caprice 2008 the ECU flooded by water and i replaced it but i don't now who i reprogram it? because the car won't start?!!
thanks A lot
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 17, 2011, 6:52 PM
Post #2 of 2
(1346 views)
|
|
Re: ECU reprograming
|
Sign In
|
|
It has to be programmed by the dealer with the specific personality of that car and then do a relearn for the security system.
30 Minute Re-Learn Procedure - Turn ON the ignition, with the engine OFF.
- Attempt to start the engine, then release the key to ON (vehicle will not start).
- Observe the SECURITY telltale, after approximately 10 minutes the telltale will turn OFF.
- Turn OFF the ignition, and wait 5 seconds.
- Repeat steps 1 through 4 two more times for a total of 3 cycles/30 minutes ( the vehicle is now ready to relearn the Passlock™ Sensor Data Code and/or passwords on the next ignition switch transition from OFF to CRANK).
Important
The vehicle learns the Passlock™ Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle. - Start the engine (the vehicle has now learned the Passlock™ Sensor Data Code and/or password).
- With a scan tool, clear any DTCs if desired (history DTCs will self clear after 100 ignition cycles).
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
| | |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 