|
|
Ruskiko
New User
Jun 7, 2012, 3:37 PM
Post #1 of 7
(2131 views)
|
|
Engine oil in coolant.
|
Sign In
|
|
My son poured engine oil into the radiator (thinking it was coolant)of his 2002 Chevy s10 blazer and then drove it. I have been using a kit that attaches to the heater hose to flush the system. Some of the oil is coming out (looks like mayo) but it is still sticking to the inside of the radiator and overflow tank. What can I do to break up the oil to get it out before replacing the thermostat and hoses?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 7, 2012, 4:08 PM
Post #2 of 7
(2105 views)
|
|
Re: Engine oil in coolant.
|
Sign In
|
|
Run some liquid dishwashing soap through it until it breaks down all the grease and then flush it real good.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Ruskiko
New User
Jun 7, 2012, 5:43 PM
Post #3 of 7
(2080 views)
|
|
Re: Engine oil in coolant.
|
Sign In
|
|
Won't that foam up?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 7, 2012, 5:46 PM
Post #4 of 7
(2077 views)
|
|
Re: Engine oil in coolant.
|
Sign In
|
|
Not if you only use a little (one squirt). It needs clean water to foam anyway. The oil will kill the bubbles.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 7, 2012, 5:58 PM
Post #5 of 7
(2071 views)
|
|
Re: Engine oil in coolant.
|
Sign In
|
|
I heard dish washing powder, the stuff for dish washing machines (Cascade), works good also. Mix it with water before adding it to your cooling system. I'd do it with the thermostat removed also.
Nick should know this. Them diesel guys are always getting blown out coolers.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jun 7, 2012, 6:08 PM)
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 8, 2012, 6:01 AM
Post #6 of 7
(2033 views)
|
|
Re: Engine oil in coolant.
|
Sign In
|
|
Oil in coolant needs be out fast. It's hard on rubber parts, hoses, and anything rubber. Automatic dish washing soaps and laundry soaps don't foam too much by intended so you don't do the "I Love Lucy" trick with foam all over the place.
You still rinse it clear out anyway and refill with proper new mix of antifreeze and water,
T
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Jun 9, 2012, 3:54 PM
Post #7 of 7
(2005 views)
|
|
Re: Engine oil in coolant.
|
Sign In
|
|
Used Cascade just yesterday actually, and must have t-stat out to do it right. Also had good luck with simple green.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
