|
|
Jeep Grand Cherokee Stalls after a stop.
|
|
|
| |
|
stilgar98
New User
Feb 23, 2013, 1:37 AM
Post #1 of 2
(1807 views)
|
Jeep Grand Cherokee Stalls after a stop.
|
Sign In
|
|
Ok, troubleshooting my girlfriend's Jeep, and I'm out of ideas of where to start looking. It's a 2004 Jeep Grand Cherokee Laredo V-8, automatic. So here are the symptoms that have been observed so far: When not fully warmed up yet, and the Jeep has came to a complete stop, will sometimes stall when accelerating from the stop, and will not start again for about 5 minutes. Any directions to take this would be greatly appreciated. Thanks.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Feb 23, 2013, 4:06 AM
Post #2 of 2
(1781 views)
|
Re: Jeep Grand Cherokee Stalls after a stop.
|
Sign In
|
|
That 5 minute period is the time you have for testing. All "crank, no start" conditions are approached in the same way. Every engine requires certain functions to be able to run. Some of these functions rely on specific components to work and some components are part of more than one function so it is important to see the whole picture to be able to conclude anything about what may have failed. Also, these functions can ONLY be tested during the failure. Any other time and they will simply test good because the problem isn't present at the moment. If you approach this in any other way, you are merely guessing and that only serves to replace unnecessary parts and wastes money. Every engine requires spark, fuel and compression to run. That's what we have to look for. These are the basics that need to be tested and will give us the info required to isolate a cause. 1) Test for spark at the plug end of the wire using a spark tester. If none found, check for power supply on the + terminal of the coil with the key on. 2) Test for injector pulse using a small bulb called a noid light. If none found, check for power supply at one side of the injector with the key on. 3) Use a fuel pressure gauge to test for correct fuel pressure, also noticing if the pressure holds when key is shut off. Once you have determined which of these functions has dropped out, you will know which system is having the problem. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
| | |
|