|
|
zmasterflex
User
May 2, 2012, 2:57 PM
Post #1 of 2
(1382 views)
|
|
Need Pressure test?
|
Sign In
|
|
Greetings all. 96 Jeep Cherokee 4.0L 4x4. Just did some work on cooling system changing the water pump and thermostat. Do I need to test the system with a special tool/machine to pump pressure in, or, if nothings leaking out I can assume the work was done properly? Any advice would be appreciated. thanks
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 2, 2012, 3:35 PM
Post #2 of 2
(1369 views)
|
|
Re: Need Pressure test?
|
Sign In
|
|
Well - what I do it pressure test my work before I even fill a system to make sure. If all is well you don't have to and if not it will leak if this was just a bad water pump. Would be possible to mess up a gasket when installed. Systems checked with just air will foam with soapy water till gasket gets wet from within with certain gaskets and that's not a cause for alarm but it would still hold pressure,
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 