|
|
Pontiac Montana cranks slowly
|
|
|
| |
|
schja
New User
Jun 2, 2013, 5:15 PM
Post #1 of 7
(1817 views)
|
Pontiac Montana cranks slowly
|
Sign In
|
|
Hi, I have a 2003 Pontiac Montana with around 120,000 miles on it. In the last two days it started cranking very slowly. I have put a new battery in it but it still cranks slowly. Any ideas of how I should proceed?
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 2, 2013, 5:40 PM
Post #2 of 7
(1805 views)
|
Re: Pontiac Montana cranks slowly
|
Sign In
|
|
Measuring the starter current draw should be the next step. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
schja
New User
Jun 2, 2013, 5:43 PM
Post #3 of 7
(1801 views)
|
Re: Pontiac Montana cranks slowly
|
Sign In
|
|
How would I go about doing that?
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 2, 2013, 5:46 PM
Post #4 of 7
(1796 views)
|
Re: Pontiac Montana cranks slowly
|
Sign In
|
|
You will need a digital voltmeter with with a high amp probe. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
schja
New User
Jun 2, 2013, 6:07 PM
Post #5 of 7
(1792 views)
|
Re: Pontiac Montana cranks slowly
|
Sign In
|
|
Okay,, Got a digital voltmeter but I'm not sure about the high end prob... I'll have to check that out. Thank you.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 2, 2013, 6:15 PM
Post #6 of 7
(1783 views)
|
Re: Pontiac Montana cranks slowly
|
Sign In
|
|
High amp probe, not high end ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 3, 2013, 4:44 PM
Post #7 of 7
(1761 views)
|
Re: Pontiac Montana cranks slowly
|
Sign In
|
|
Don't use the amp scale and amp lead position to measure current draw with your meter. Don't think the fuse can take it. You need an inductive amperage clamp to measure the vast amounts of current that a starter motor uses as HT stated. Other than that you can do a voltage drop check on the battery cables to see if you have high resistance in the cabling causing your slow starter. http://www.freeasestudyguides.com/voltage-drop-test.html Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jun 3, 2013, 4:44 PM)
|
|
| |
|