|
|
dennishazard
User
Jun 9, 2015, 11:54 AM
Post #1 of 9
(1761 views)
|
1998 dodge Durango 5.9 engine with about 180,00 miles
last year I juiced up my a c and didn't have any problems with it, about 2 weeks ago I turned it on just to check it, it worked ok .
today I turned it on because its hot out and it was blowing warm air, im not sure if the compressor is kicking on or not, I checked all the fuses and they seem ok,
anyone help me ? thanks, Dennis from Wisconsin
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 9, 2015, 12:19 PM
Post #2 of 9
(1757 views)
|
If you can't tell if the compressor is on or not, then this repair is certainly not for you. You need to find a competent AC specialist.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 9, 2015, 12:34 PM
Post #3 of 9
(1753 views)
|
Dennis - have to agree here. If you can't tell if a compressor is engaged or not don't touch anything to do with it. Blasting in refrigerant sounds like what you did that wild luck just happened to work once before also shows you shouldn't mess with this without some homework on just how a system works.
Just FYI, when compressor isn't engaged everything to do with A/C except a pulley is just going along for the ride. When engaged you have to know a lot or ruin a good system easily,
T
|
|
| |
|
|
dennishazard
User
Jun 11, 2015, 8:02 AM
Post #4 of 9
(1732 views)
|
compressor does kick on
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 11, 2015, 9:23 AM
Post #5 of 9
(1728 views)
|
OK - You've figured out what engaged or not is and it does "kick on" you just said. Does it stay engaged or quickly shut down?
Reading between the lines it worked you said with a juice up job a couple weeks ago so the overwhelming problem is it leaks.
You can't just "juice up" as you put it and get that right so easily but might have with whatever you used to get whatever product into the system.
IDK where to go with this until I/we know what you have for testing anything. At a minimum you need gauges and fast thermometers if it will stay engaged (I about know it doesn't) can get some info if this is a low charge problem or other.
Then to do anything about it some fixes are simple some are real difficult but end up with charging it properly with the equipment to do that.
Strongly think it's a leak to find and fix then move on to charging it up knowing how much product/refrigerant you are putting in.
Are you equipped to do that plus know when to stop if it isn't going properly?
If not there's just so much to know and have to proceed and this leak must be quite fast so can't be ignored.
Everyone wants to save a buck and this area of auto work takes a lot of understanding and equipment, doing it right or risk making it much worse and VERY costly,
T
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 11, 2015, 4:37 PM
Post #6 of 9
(1721 views)
|
Another suicide can victim.
If your going to play with AC, you need an AC manifold gauge set. Tired of people coming in here providing no system pressures and using the one gauge wonder tapped into a suicide can.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jun 11, 2015, 4:40 PM)
|
|
| |
|
|
dennishazard
User
Jun 11, 2015, 6:25 PM
Post #7 of 9
(1714 views)
|
compressor was shutting off right away, it was last year that I put Freon in it and I just put more in it today,now its running good temp coming out of the vents is about 45 degreese
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 11, 2015, 6:30 PM
Post #8 of 9
(1713 views)
|
Your lucky. Seen people push refrigerant into a system when it has an expansion valve issue or they overshoot and create too much head pressure. Now you need to find the leak. Every time that thing gets low the compressor isn't getting lubed properly. Eventually the compressor is going to grenade or lock up.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 12, 2015, 2:04 AM
Post #9 of 9
(1709 views)
|
Yep, and it loses some more oil with every bit of leak.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
