Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




cavalier bearing replacement

Search for (search options)
 



rick26182
New User

Mar 19, 2009, 9:48 PM

Post #1 of 3 (3085 views)
post icon cavalier bearing replacement Sign In
Wink1997 chev cavalier 2.2
when I replace the r/f hub bearing how tight should the axle nut be,I don't want to make them too tight and have them wear out fast.And do the bearings need to be greased or are they a sealed unit.Thanks


(This post was edited by rick26182 on Mar 19, 2009, 10:02 PM)


Double J
Veteran / Moderator
Double J profile image

Mar 19, 2009, 10:34 PM

Post #2 of 3 (3082 views)
Re: cavalier bearing replacement Sign In
  1. Raise and safely support the vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the drive axle nut.
  4. Remove the brake caliper bolts and support the brake caliper to the side.
  5. Remove the brake rotor.
  6. Remove the 3 bolts that go through the steering knuckle from the back of the knuckle. Rust buildup may require a generous application of penetrating oil where the hub fits into the knuckle.
  7. Remove the hub and bearing assembly from the steering knuckle.

To install:
  1. Install hub and bearing assembly to steering knuckle while carefully inserting the drive axle through hub assembly.
  2. Install hub and bearing bolts and tighten to 70 ft. lbs. (95 Nm).
  3. Install the brake rotor.
  4. Install the brake caliper and bolts.
  5. Install the axle nut and tighten it to 185 ft. lbs. (260 Nm).
  6. Install the tire and wheel assembly and tighten the lugnuts to 100 ft. lbs. (140 Nm).
  7. Lower the vehicle.
  8. Road test the vehicle and verify proper operation.
Sealed units.........


(This post was edited by JIM N on Mar 19, 2009, 10:35 PM)


rick26182
New User

Mar 19, 2009, 10:56 PM

Post #3 of 3 (3078 views)
Re: cavalier bearing replacement Sign In
Great advice Jim,Thanks a lot.





 
 
 






Search for (options) Privacy Sitemap