Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









f150 steering problem


Search for (search options)
 



muncho
Anonymous Poster
zach_price@comcast.net

Apr 17, 2008, 9:08 AM

Post #1 of 5 (4816 views)
f150 steering problem Sign In

i just bought a 2004 f150 xlt crew cab 4x4. everything was great when i drove it home and for a few days after. then i got in it one morning to go to work and when i made the first turn i noticed the wheel seemed to get hard then easy then hard then easy...to turn. it doesnt matter if it is going into the turn or coming out of it. i checked the fluid and it was fine. it has been a couple days now and sense this started it has not stopped. any suggestions
muncho


DanD
Veteran / Moderator
DanD profile image

Apr 17, 2008, 10:01 AM

Post #2 of 5 (4810 views)
Re: f150 steering problem Sign In

From your discretion I would check the coupling shaft between the steering column and the steering gear.
This shaft usually has a couple of universal joints in it, like a short driveshaft; if one of those joints is beginning to seize, it might be the cause of this?

Dan.

Canadian "EH"






Guest
Anonymous Poster

Apr 17, 2008, 10:33 AM

Post #3 of 5 (4805 views)
Re: f150 steering problem Sign In

i did check that a little and everything seems to be tight there and i dont feel any kind of grind or catch as i am turning the wheel. any more thoughts
thanks


way2old
Veteran / Moderator
way2old profile image

Apr 17, 2008, 12:32 PM

Post #4 of 5 (4800 views)
Re: f150 steering problem Sign In

Dan is correct on the little u joints. These get rust and dirt in them and get stiff and that is what is giving you yout tight then loose feel. You can disconnect it from the steering box, spray the little u joint with penetrant and work it around until it frees up. See if this helps.



Being way2old is why I need help from younger minds


Guest
Anonymous Poster

Apr 17, 2008, 2:16 PM

Post #5 of 5 (4796 views)
Re: f150 steering problem Sign In

thanks for the info guys i accualy stoped at a local shop a little while ago and we determind that it is the little ujoints so i think i will start by taking it aparts and trying to free it up first and if that doesnt work then replace them. thanks again for the help!!!
muncho






 
 
 






Search for (options) Privacy Sitemap