Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






s10 blazer wont start


Search for (search options)
 



james1967
New User

Feb 26, 2010, 11:34 AM

Post #1 of 2 (2740 views)
post icon s10 blazer wont start Sign In

I have a 1993 4.3 vortec vin code w s10 blazer with 145000 miles on it the blazer was running ruff so i put on new cap, rotor, plugs, and wires. the next day i had been going to a number of places was running fine i turn off hwy and turn corner and it died would not start back up . i checked for spark it had none.I put on new coil still nothing, so changed the distibutor with a new one . when i tested old one the pick up coil was bad . ok here is were things went weird it still woudnt start. so went for the fuel system changed fuel reg.,fuel pump,cleand egr ,new tps sensor . now all it will do is crank i can put fuel in the plentum intake and it will start put it idles at a high rpm. i dont have tach so i dont know how high put it sounds to be around 1000 rpm . i cant put a load on it it will die . i have looked for a vacuum leak cant find one i have spayed everything with carbcleaner no response. When i can start it with primeing the intake it idles smooth . i'm lost please help i'm in s10 hell




Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Feb 26, 2010, 1:36 PM

Post #2 of 2 (2736 views)
Re: s10 blazer wont start Sign In

Egad! You are making the parts industry happy! The issue is lack of fuel from what I read. What is the operating pressure when you do get it going and prime it? GMs are fussy to stay within specs and if not isolate why. You've replaced so much it's and even a new part could be bad. An exhaust restriction could change all the info and send wrong amount of fuel but would usually start without priming,

T







 
 
 






Search for (options) Privacy Sitemap