|
|
hanban8
New User
Jan 13, 2013, 3:55 PM
Post #1 of 9
(1743 views)
|
|
whirring noise not fixed
|
Sign In
|
|
I have a vauxhall corsa 2006 (06) 1.2 engine with 50000 on the clock. It went for a service where the garage changed front tyres to back. As soon as i picked it up from garage it was making loud whirring noise when at 15mph and above, could feel the noise in the pedals. Garage then took it in and fixed two broken wheel bearings (£400). Picked it up and its still whirring although now quieter.
Any ideas? Should i take back to garage, anythig to be worried about
Thanks
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jan 13, 2013, 4:15 PM
Post #2 of 9
(1734 views)
|
|
Re: whirring noise not fixed
|
Sign In
|
|
Tyres can make almost exact wheel bearing type noises. Wheel bearing along should be silent. You may have a combination problem or something else contributing but from reading your post I think tyres need careful scrutiny. Not all problems with them can be seen or felt. A bit rare but some are plain lousy designs and subject to be noisier or noisy earlier in their life. You can feel this in pedals inside so I'd default to checking it out.
Many plain tyre noises are obnoxious and not harmful and a pro needs to determine that. You are complaining so I suggest finding out for sure which will take hands witnessing by someone who can tell the difference of what is or isn't normal or could be unsafe,
T
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jan 13, 2013, 4:18 PM
Post #3 of 9
(1727 views)
|
|
Re: whirring noise not fixed
|
Sign In
|
|
If a tire developes a cupping or choppy wear pattern, it can make a noise very similar to a beaing noise........Take a good look at the tread on your tires...
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jan 13, 2013, 5:03 PM
Post #4 of 9
(1711 views)
|
|
Re: whirring noise not fixed
|
Sign In
|
|
Yep, the cupped tires were on the rear and quiet because there is no weight back there. Now they are supporting the engine which brings out the noise however being on the front will eventually correct the problem so if you live with it fore a while, it should get quieter.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jan 13, 2013, 5:11 PM
Post #6 of 9
(1701 views)
|
|
Re: whirring noise not fixed
|
Sign In
|
|
I've been fixing them that way for 15 years.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jan 13, 2013, 5:16 PM
Post #7 of 9
(1697 views)
|
|
Re: whirring noise not fixed
|
Sign In
|
|
Yea that's why I don't put stuff in stone.....
In any suspension training I've been in it was alway brought up that whenever a tire developes a wear pattern...it's there for life.....and I still believe this to be true with uneven alignment wear but thought it to be true with cupping & chopping wear pattern as well, but found out recently that the cupping & chopping can straighten itself out......but the uneven alignment wear is a life thing.....
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jan 13, 2013, 5:20 PM
Post #8 of 9
(1689 views)
|
|
Re: whirring noise not fixed
|
Sign In
|
|
I agree with you to a point. You can't erase shoulder wear on one side but if you have slight edge wear on both side, being on the back of a RWD will flatten them out.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jan 13, 2013, 6:55 PM
Post #9 of 9
(1680 views)
|
|
Re: whirring noise not fixed
|
Sign In
|
|
On correcting tire wear issues: I find and have corrected the uniform "saw toothing" by cross rotating on tires and vehicles that would allow that. Sounded worse till the leading edge making noise got a bit of wear and some evened out for rest of life. That cupping thing is a different bird. Some tires just plain suk and do that and can pick one inner row of tread. Backs or FWDs are much more likely.
A lot more engineering goes into tires than people realize. Some is to cut corners to put a product out cheap enough to sell and each brand can have good and bad but it depends also on what customer wants and what is right for a particular vehicle.
Very part time but worked tires for 35 years now. Was part of the second huge Firestone recall still do my own at other's shops never having room for the best of machines - T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
