|
|
mattc
New User
Feb 2, 2008, 11:23 AM
Post #1 of 9
(3516 views)
|
|
2000 Ram 1500 heater
|
Sign In
|
|
Hi - new visitor here - thanks for the opportunity. I took my 2000 Ram to the shop yesterday for a new water pump and belt. All of this went fine but now I have no heat. I've checked all of the vacuum lines I can find, I can feel the heater core behind the glove box and it's hot and the blower is working fine. The shop is closed and I need to have my truck at work Monday. Could it be air blend and if so is it electric or vacuum? Is there any way to "rig" this into the correct position until I can fix it? Any help will be greatly appreciated.
|
|
| |
|
|
Double J
Veteran
/ Moderator
Feb 2, 2008, 1:28 PM
Post #2 of 9
(3510 views)
|
|
Re: 2000 Ram 1500 heater
|
Sign In
|
|
Mode Door = vacuum motor
Blend Air Door = electric actuator
Fresh/Recirc = vacuum motor
(This post was edited by JIM N on Feb 5, 2008, 12:48 PM)
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Feb 3, 2008, 12:29 AM
Post #3 of 9
(3506 views)
|
|
Re: 2000 Ram 1500 heater
|
Sign In
|
|
Nice find JIM. With this recent water pump job and this problem right away I suspect it might not be properly filled with coolant - even hot air will make the core hot to the touch but not transfer heat worth a damn. Check level at radiator cap and then adjust level at recovery tank,
T
|
|
| |
|
|
mattc
New User
Feb 3, 2008, 7:52 AM
Post #4 of 9
(3504 views)
|
|
Re: 2000 Ram 1500 heater
|
Sign In
|
|
Thanks guys, the coolant level is good and flowing. I'm really suspecting the air blend but I'm having a hard time believing the coincedence of timing. The last time I had the truck fixed there it was the air conditioning and I lost the cruise control. It seems a bit of a chore to get that far into the dash - any diagnostic suggestions before I drop another $1000 on the truck? Thanks again.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Feb 3, 2008, 8:38 AM
Post #5 of 9
(3499 views)
|
|
Re: 2000 Ram 1500 heater
|
Sign In
|
|
The coincidence is uncanny?? JIM found that the blend door is an electric actuator. Perhaps you can get a peek or hand on it going up from under passenger's side lower dash or thru the glove box. I don't know but it might be electrically controlling a lever that you could get at. Do the other functions of the control head work?
T
|
|
| |
|
|
mattc
New User
Feb 3, 2008, 9:21 AM
Post #6 of 9
(3498 views)
|
|
Re: 2000 Ram 1500 heater
|
Sign In
|
|
Found the actuator - thanks - unfortunately there isn't anything exposed enough to get a tool on. Yes, everything else works. I can't dismantle anything either due to proximity to the floor. It sounds like I should brace for another bill huh?
(This post was edited by mattc on Feb 3, 2008, 9:23 AM)
|
|
| |
|
|
jj
User
Apr 20, 2009, 7:32 PM
Post #7 of 9
(3301 views)
|
|
Re: 2000 Ram 1500 heater
|
Sign In
|
|
under hood pass. side should be a black vacuum line by dryer follow it to engine checking it for breaks and still hooked up
|
|
| |
|
|
Jeff Norfolk
Enthusiast
Apr 21, 2009, 4:53 PM
Post #8 of 9
(3292 views)
|
|
Re: 2000 Ram 1500 heater
|
Sign In
|
|
jj, I think the blend door actuator is electric per the previous posts from 2 month ago.
Jeff
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Apr 22, 2009, 12:08 PM
Post #9 of 9
(3290 views)
|
|
Re: 2000 Ram 1500 heater
|
Sign In
|
|
jj: Appeciate any help and comments. Look at the dates or the original posts - some are just archives,
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
