|
|
Steve O'neil
New User
May 23, 2008, 11:18 AM
Post #1 of 2
(1529 views)
|
need help to remove pulley at a/c
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 23, 2008, 1:51 PM
Post #2 of 2
(1518 views)
|
Not certain but I think that will need a puller for A/C clutches - rentable I've heard at some major parts places. Take a look. I forget what you should find there. Perhaps a rubber plug and a nut or nut missing (that's ok) behind it and a threaded HOLE-external such that puller pushed on shaft and such that is doesn't mess up threads. There could be washers (real small sometimes) that are used to set the air gap for the clutch. .020 or less such that there zero drag is about right - too wide it won't engage.
There's a couple that just come out removing the nut or bolt in center. Don't bend up the pulley with any claw pullers.
Again not sure - "one of those days" You may be able to get a straight shot at the compressor thru FR wheel well with some plastic shield removed...........
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 