|
|
tractorboy
User
Jul 10, 2020, 10:51 AM
Post #1 of 8
(1590 views)
|
when i turn the wheel it sound like a dolphin. The pressure side coming back to the reservoir is really flowing in looks turbulent. not overflowing so I would assume that the suction side is drawling a lot. any ideas?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 10, 2020, 12:36 PM
Post #2 of 8
(1575 views)
|
|
Re: 2003 ALTIMA PS
|
Sign In
|
|
The turbulence is normal, especially if it is a little low on fluid.
Where is the noise originating from?
The chirping like a dolphin sounds a lot like a belt noise.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
tractorboy
User
Jul 11, 2020, 6:23 PM
Post #3 of 8
(1547 views)
|
|
Re: 2003 ALTIMA PS
|
Sign In
|
|
hi HT I made a video https://youtu.be/yDGfDqcnILw
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 11, 2020, 6:26 PM
Post #4 of 8
(1542 views)
|
|
Re: 2003 ALTIMA PS
|
Sign In
|
|
That video is locked as private.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
tractorboy
User
Jul 11, 2020, 8:06 PM
Post #5 of 8
(1534 views)
|
|
Re: 2003 ALTIMA PS
|
Sign In
|
|
that's weird supposedly anyone having the link should be able to view it, did you try cutting and pasting the link into your browser? try again thanks
were you the one that was helping me with a door that would not open on the same car. i finally got the door open, took out the back seat and popped all the door clips on the finisher did minor damage to the door finisher on the inside.of course took out the four screws one on the lock/door release, 3 on the arm rest. tried searching for my posts...could not find anything
(This post was edited by tractorboy on Jul 11, 2020, 8:15 PM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 12, 2020, 3:51 AM
Post #6 of 8
(1515 views)
|
|
Re: 2003 ALTIMA PS
|
Sign In
|
|
No, the link requires a login.
Here is your other question about door locks
http://autoforums.carjunky.com/...search_engine#201872
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Jul 12, 2020, 3:54 AM)
|
|
| |
|
|
tractorboy
User
Jul 12, 2020, 9:15 AM
Post #7 of 8
(1503 views)
|
|
Re: 2003 ALTIMA PS
|
Sign In
|
|
hi try this i made the video public https://www.youtube.com/watch?v=yDGfDqcnILw&feature=youtu.be
i got the door unlocked. one BIG advantage after taking the back seat out was i was able to turn off the child lock. a piece of dried grease fell out when the door opened, so that may be what had happened.
i also made a video on how the Altima lock works https://www.youtube.com/watch?v=Kp_TEFvLUHk
(This post was edited by tractorboy on Jul 12, 2020, 9:42 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 12, 2020, 9:30 AM
Post #8 of 8
(1496 views)
|
|
Re: 2003 ALTIMA PS
|
Sign In
|
|
It sounds like you have two completely different noises going on there.
There is a whine in the engine that sounds like a bad pulley bearing.
The noise coming from the wheel could be a dry ball joint.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Strut spring orientation and strut mount tension nut
