Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






Search Auto Parts

Alignment after front end work necessary?


  Email This Post



jbora88
New User

May 20, 2022, 11:00 AM

Post #1 of 2 (176 views)
Alignment after front end work necessary? Sign In

Just replaced the front left CV axle, wheel bearing, and lower ball joint on my 2011 Ford Escape XLT 4WD V6 3.0L. I know conventional wisdom is that you should get a front end alignment after doing most types of front end work. However, if I let go of the steering wheel going 70mph, the car doesn't pull in either direction. I take this to mean that the alignment is fine and I don't need to have it professionally aligned. Is this a safe assumption or should I still get the alignment done?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

May 20, 2022, 11:18 AM

Post #2 of 2 (170 views)
Re: Alignment after front end work necessary? Sign In

It's not the pulling that you have to be concerned with. The toe-in is the critical adjustment that will wear tires the fastest and it has no symptoms.

The particular parts you changed should have a minimal effect on the alignment but it should still be done to protect the tires. It only takes a very small amount of toe change to scuff the tires severely.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap