Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Rubbing issue!!


Search for (search options)
 



Macweb3000
User

Jan 7, 2014, 6:10 PM

Post #1 of 5 (1672 views)
Rubbing issue!! Sign In

Hey guys I have. A 2000 dodge ram 1500 5.2liter v8 rear wheel drive. And the front tires are rubbing up against the lower control arms on both sides. The only thing is is that it drives perfectly fine i don't think it's been aligned in a while but I can let go of the wheel for a good 5 seconds and then it starts slowly pulling to right but that's it. It's got over 100000 miles on original everything. The suspension hasn't been replaced and I feel like there is some excessive pitching and rolling but I can't be sure. Any guesses what it could be?


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Jan 7, 2014, 6:51 PM

Post #2 of 5 (1656 views)
Re: Rubbing issue!! Sign In

You should get the vehicle up in the air and have the suspension and steering components inspected.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.


Macweb3000
User

Jan 7, 2014, 7:04 PM

Post #3 of 5 (1650 views)
Re: Rubbing issue!! Sign In

I can tell you right now that the bushings and are aged and cracked and the ball joint rubber casing is broken but like I said it drives perfectly so it's kind of contradicting in terms of what I'm feeling and what I'm seeing under the truck.


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Jan 8, 2014, 5:30 AM

Post #4 of 5 (1629 views)
Re: Rubbing issue!! Sign In

You should still have it inspected. Without being able to look at it, it is hard to say what exactly is going on there. The ball joints can get dirt and water in them if the boot is disintegrated or ripped which causes it to wear out prematurely. You sure don't want a ball joint popping apart.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.


DanD
Veteran / Moderator
DanD profile image

Jan 8, 2014, 5:41 AM

Post #5 of 5 (1628 views)
Re: Rubbing issue!! Sign In

You cannot tell what condition a ball joint is in, not without unloading the spring tension.
If the truck has stock wheels and the recommended tire size; you know something is wrong for the tires to scrub.
Get it checked out; you should never second guess steering, suspension or brakes.

Dan.

Canadian "EH"










 
 
 






Search for (options) Privacy Sitemap