|
|
gfj
New User
Nov 23, 2009, 7:23 PM
Post #1 of 6
(1852 views)
|
My 1998 oldsmobile achieva, V6, auto trans, front wheel drive, 135,000 miles, seemed to be missing, I changed plugs and wires, throttle sensor, than after closer checking, I think it is the TCC, it seems to be kicking in and out between the speeds 58-70. I changed the trans fluid and filter but didn't help. I have been able to only get 1 code and it said loose connection. i have checked all and tighten them but still jerking at these speeds, only does this in overdrive, in drive it runs fine. do you have any suggestions what I need to check.
Thanks
gfj
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 23, 2009, 7:31 PM
Post #2 of 6
(1844 views)
|
|
Re: 1998 oldsmobile
|
Sign In
|
|
There are no codes that say anything about loose connections. What was the exact code number?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
gfj
New User
Nov 24, 2009, 7:41 PM
Post #3 of 6
(1832 views)
|
|
Re: 1998 oldsmobile
|
Sign In
|
|
On my hand held scanner it said loose connection check TCC, which I have , but no luck
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 24, 2009, 7:44 PM
Post #4 of 6
(1829 views)
|
|
Re: 1998 oldsmobile
|
Sign In
|
|
I don't know what kind of nonsense your scanner is telling you but codes supply specific data information. They don't make conclusions like loose connections. I need a number.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
gfj
New User
Nov 24, 2009, 7:49 PM
Post #5 of 6
(1822 views)
|
|
Re: 1998 oldsmobile
|
Sign In
|
|
Sorry to have wasted your time but that is what it said , NO numbers.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 24, 2009, 7:52 PM
Post #6 of 6
(1818 views)
|
|
Re: 1998 oldsmobile
|
Sign In
|
|
All codes are identified by numbers so you just need a different scanner. It will start with a "P" and then 4 numbers.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Nov 24, 2009, 7:53 PM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
