|
|
|
2000 mazda b2500 clutch slave cylinder connector
|
|
|
| |
|
|
bmanclarkdude
New User
Oct 1, 2013, 2:23 PM
Post #1 of 2
(1366 views)
|
|
2000 mazda b2500 clutch slave cylinder connector
|
Sign In
|
|
Hello everyone this is my first post to your fine forum.
2000 mazda b2500 2.5 liter single overhead cam 2 plugs per cylinder
After cruising 230k miles on the same clutch, it finally crapped out.
I installed new clutch and pilot bearing and I started bleeding the clutch.
The hydraulic connector from the master cylinder to clutch slave cylinder will not stay connected.
I push it in and I can not pull it out bare handed without compressing the locking fingers in the female connector
with the ring on the male connector. But when I start to get pressure to the slave cylinder it pops out.
The only thing I can think of to address this problem is to replace the slave cylinder. Are there any options
that I'm not seeing?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 1, 2013, 3:04 PM
Post #2 of 2
(1354 views)
|
|
Re: 2000 mazda b2500 clutch slave cylinder connector
|
Sign In
|
|
Nope, replacing the slave is likely the only way t5o resolve it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 