Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









2001 Saturn SC2 Transmission Trouble. Please Help.


Search for (search options)
 



saturn nightmare
New User

Dec 16, 2011, 8:28 AM

Post #1 of 4 (4749 views)
2001 Saturn SC2 Transmission Trouble. Please Help. Sign In

I am having trouble with my 2001 Saturn SC2. The transmission is slow to shift into reverse. It drives in 1st, revs to 5000 RPM and shifts to 2nd, same to 3rd.Then it stays in 1st(possibly a limp mode. I replaced the tranny and the new one is doing the exact same thing. Please help if possible. Thank you


(This post was edited by saturn nightmare on Dec 16, 2011, 8:48 AM)


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 16, 2011, 8:51 AM

Post #2 of 4 (4720 views)
Re: 2001 Saturn SC2 Transmission Trouble. Please Help. Sign In

I deleted your duplicate. One question is sufficient.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Sidom
Veteran / Moderator
Sidom profile image

Dec 16, 2011, 6:28 PM

Post #3 of 4 (4671 views)
Re: 2001 Saturn SC2 Transmission Trouble. Please Help. Sign In


In Reply To
I am having trouble with my 2001 Saturn SC2. The transmission is slow to shift into reverse. It drives in 1st, revs to 5000 RPM and shifts to 2nd, same to 3rd.Then it stays in 1st(possibly a limp mode. I replaced the tranny and the new one is doing the exact same thing. Please help if possible. Thank you


You replaced it with a new tranny or wrecking yard tranny??

Did you pull codes to see if there were any stored tranny codes?


saturn nightmare
New User

Dec 17, 2011, 9:58 AM

Post #4 of 4 (4649 views)
Re: 2001 Saturn SC2 Transmission Trouble. Please Help. Sign In

I replaced it with a junkyard tranny and it has the same problem exactly as the original tranny. 3 codes P0732, P0733, P0734. Slow to shift into reverse, Goes into 1st fine revs before shifting to 2nd, revs before shifting to 3rd, then stays in first until you shut car off and restart. Genesis scanner reads these codes under engine/PCM but scanner will not read under transmission it says check that ignition is on, connection is good, etc. I find it hard to believe that I have 2 transmissions with the exact same failure. I allready replaced the throttle position sensor, did not fix it.






 
 
 






Search for (options) Privacy Sitemap