|
|
|
2001daewoo manual gears stiff to engage
|
|
|
| |
|
|
queen55
New User
May 4, 2013, 7:13 AM
Post #1 of 2
(1398 views)
|
|
2001daewoo manual gears stiff to engage
|
Sign In
|
|
My 2001 daewoo nubira 1.6ltr gears are very stiff to engage and sometimes don't unless have turned engine off then put in gear first. There was no lead up to problem.
I would like to know if anyone could advise on the best way to fix problem
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 4, 2013, 7:25 AM
Post #2 of 2
(1389 views)
|
|
Re: 2001daewoo manual gears stiff to engage
|
Sign In
|
|
I take that as it is hard to shift. A common cause is clutch is not totally releasing and frequently caused by a failure in hydraulic linkage if equipped - many are hydraulic. If fluid level gets too low there's a leak to be found and fixed. Those can fail without a leak too.
General on that set up: A master cylinder with the fluid, line to a flex hose and on to a slave cylinder the released the clutch. Anything wrong with any of that will cause hard shifting, especially downshifts. May not be that at all but would check that out first,
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 