|
|
john.mahoney77
New User
Jan 13, 2010, 5:27 PM
Post #1 of 2
(2901 views)
|
i have a 91 ford 4x4 with a 300 six and a e4od tranny. the tranny went out and i got one that was for a 302 or 351 im not sure. when i get the tranny in and get it bolted up the motor will not turnover. I was wondering what would cause this? is it the wrong torque converter for the motor,or flywheel ,or what. PLEASE HELP
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jan 13, 2010, 8:41 PM
Post #2 of 2
(2892 views)
|
Sure sounds like something isn't compatible. Start with unbolting the converter & see if the motor will turn over. If not, loosen the bellhousing bolts & mount and slide the trans back a little bit and see if that frees it up. If it does then the trans is going to have to come back out unfortunately...........
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 